Jeron 4862 041808

Security Intercom System Telephone Interface 4862 Jeron Cat 4862 PBX Telephone connects a Jeron Pro 480 Call System to a PBX System The 4862 allows from remote stations to be for to outside telephones 4862 Interface is used in conjun with the 4875 Master Calls Station Auto Dials to Outside Direct Auto Dial stations may Auto a single preprogrammed DTMF phone number when a button is pressed Audio will time out when setting for the Call timer is exceeded ANSWER CALL FOR to Cat 4862 Interface from remote stations to an Master station may Forwarded to an phone via Auto Dial remote station calls a Master station to No Answer Call to the Cat 4862 PBX Interface When the call is at the Master station the 4862 will Auto Dial the outside number a call is answered two way communication is established Data Surface mount wall brack provided H x W x D x 5.6 x 6.5 in x 14.3 x 16.5 cm Disconnect Pushbutton LED Indicators PBX Connect and Configuration OK Voltage 28 VDC 300 Connections Jack for Connection to port on PBX 10 foot plug ended for connection to Main provided Jeron Cat 4875 Master is required IS SUBJECT TO CHANGE WITHOUT NOTIFICATION Calls disconnect a call hang up Audio connection terminates call remains on at the Station All calls must be can at the 4875 Master PBX Telephone Interface has indicators to continu verify proper operation and a switch for manual over of the PBX loop connection PBX Telephone Interface con to a dedicated extension port a PBX key phone system that analog terminals is made to any unused port on the Main Control with provided 10 foot plug ended The unit is housed in a sturdy surface mount enclosure a medium grey finish 4875 Master is required JERON Electronic Systems Inc cid 132 1743 55 W Rosehill Drive cid 132 Chicago IL 60660 3921 275 1900 cid 132 USA Canada 800 621 1903 cid 132 Fax 773 275 0283 www jeron com cid 132 E mail sales jeron com