Jeron 6822+ 081709
File Preview
Click below to download for free
Click below to download for free
File Data
Name | jeron-6822-081709-7346085129.pdf |
---|---|
Type | |
Size | 912.96 KB |
Downloads |
Text Preview
Health Care Call System Callcord Patient Station 6822 Data Flame retardant UL 94 5VA 3 gang PC ABS blend enclosure box Two or three gang backbox with two or three gang trim Refer to Installation Manual H x W x D 4.6 x 6.8 x 1.2 in 11.7 x 17.2 x 3 cm 2 low ambient light LEDs 1 Cancel pushbutton 2 pillow speaker call cord DIN jacks 1 red monitor LED 2 green call placed LED indicators 2.75 in 45 Ohm 7 position Rating 28 VDC 0.9 W Termination Two 2 RJ 4 Two 2 IDC order specify 6822 6822 T for order with 6808 T and 8804 T UL 1069 Listed C UL Canadian Standard C22.2 NO 125 Tilt action receptacle allows easy removal without damage to Continuous supervision of station power and associated dome light Sealed easy to clean station overlay Cordout feature may be bypassed staff for cleaning using Cancel button RJ 45 connectors from station to junction for easy service No dummy plug required Mounts on 2 gang or 3 gang trim ring On board lighting for visibility in low light Visually clean design with no fasteners Model 6822 Dual Callcord Patient Stations are on the Provider 680 Nurse Call System to provide levels of call priority for annunciation at assigned station s zone light s pocket pager s and for both and hands free voice communication to Nurse Console s and wireless phones the call button on a callcord is pressed the asso CALL placed LED and Dome Light illuminate nurse consoles pocket pager s and wireless display location and priority of the call When connection to the station is established the red LED lights to indicate the audio status cancel button clears all active calls including calls The station DIN jacks tilt align with of a connected pillow speaker or callcord avoid damage to the jack or station station is molded using a flame retardant PC ABS housing with flush wall mounting on a 2 or 3 backbox The station snaps onto a mounting included with no visible fasteners All wiring to the associated Dome Light utilize stan RJ 45 connectors for Cat 5 5e 6 wiring Wiring to peripheral stations utilize IDC connec The station is continuously supervised to both sim service and troubleshooting while ensuring that station is always operational The station also an associated Dome Light and optionally a Code Station JERON Electronic Systems Inc cid 132 1743 55 W Rosehill Drive cid 132 Chicago IL 60660 3921 275 1900 cid 132 USA Canada 800 621 1903 cid 132 Fax 773 275 0283 www jeron com cid 132 E mail sales jeron com SUBJECT TO CHANGE WITHOUT NOTIFICATION