Mircom CAT-5108 CR^CF-MP Series Moisture Proof Heat Detectors (English)

MOISTURE PROOF HEAT DETECTORS SERIES Dual Action Rate of Rise Fixed Temperature Detects Rate of Ambient temperature rise of 8 Detectors operating on xed temperatures are available in two settings of 135 57 or 93 Clear anodized aluminium nish Model CF 135MP is a Fixed Temperature Only The xed temperature portion consists of spring loaded plunger retained by a fusible alloy releases when the ceiling temperature reaches 57 When released the plunger strikes normally open set of contacts and holds them Spacing on an uninterrupted ceiling is 40 ft The CF 135MP is identi ed by a black dot its heat collector n Model CR 200MP is a combination Rate of Rise Fixed Temperature detector that operates in same way as the CR 135MP with the exception the xed temperature portion releases when the temperature reaches 200 93 Spacing an uninterrupted ceiling is 70 ft 21.3 for the and 25 ft 7.6m for the xed temperature a reduced spacing parameter from the CF The CR 200MP is identi ed by a white dot its heat collector n Model CF 200MP is a Fixed Temperature Only The xed temperature portion releases the ceiling temperature reaches 200 93 is 25 ft 7.6m The CF 200MP is identi ed a black dot and a white dot on the heat collector n CR and CF MP Series Moisture Proof Detectors designed for hazardous locations and Moisture applications Each Moisture Proof detector available in single or multiple circuits with open closed contact con gurations and any of the xed temperature settings including 135 165 200 285 degrees Farenheit Moisture Proof detector is characterized by a phenol plastic seal plate and black and white connections It is speci ed for use in high environments and areas that are subject corrosive elements or spray washing The suf x denotes Proof Model CR 135MP is a combination Rate of and Fixed Temperature detector A set of open contacts will close when the ceiling increases at a minimum rate of 8.4 per minute Closing the contacts initiates the re alarm sequence Independent of the rate of rise the xed temperature portion consists of spring loaded plunger retained by a fusible alloy releases when the ceiling temperature reaches 57 When released the plunger strikes contacts and holds them closed Spacing on uninterrupted ceiling is 70 ft 21.3m for the 40 ft 12.2m for the xed temperature reserves the right to make changes at any time without notice in prices colours materials components equipment speci cations and models and also to discontinue models TO BE USED FOR INSTALLATION PURPOSES NUMBER Con gurations Detector in the Moisture Proof Series is available Normally Open by far the most common or Closed or Multiple Circuit con gurations Model Number does not re ect the Normally however the letter denotes Closed For example 135 C MP a rate of rise xed temperature detector at 135 with Normally Closed contacts with the moisture proof seal plate Speci cations CR CF Series Moisture Proof detectors shall installed in areas where corrosive elements or washing of walls and ceiling surfaces is The xed temperature portion and rate of rise operation shall be determined by the temperature The Moisture Proof detectors be installed in areas where environmental including dust vapours insects etc cause an ionization or photoelectric type to initiate a false alarm cations Rating 125 VAC 28 VDC 125 VDC 250 VDC 5.25 13.4 cm 2.0 4.85 cm lb 330 gm Information of Rise Fixed Temperature to 135 57 Moisture Proof Heat Detector of Rise Fixed Temperature to 200 93 Moisture Proof Heat Detector Temperature 135 57 Moisture Proof Heat Detector Temperature 200 93 Moisture Proof Heat Detector TO BE USED FOR INSTALLATION PURPOSES by Interchange Way Ontario L4K 5W3 905 660 4655 905 660 4113 Witmer Industrial Estates Falls NY 14305 Free 888 660 4655 Toll Free 888 660 4113 page http www mircom com Email mail mircom com 5108 5