Mircom CAT-5149 i3 Series Reversing Relay Synchronization Module (English)

REVERSING RELAY SYNCHRONIZATION MODULE SERIES for a with 2 and 4 wire i3 detectors with a sounder all i3 sounders on a loop when one all i3 sounders on the loop alarm signal be used with bell alarm alarm relay or outputs a eld selectable switch to both coded and continuous signals i3 detector silencing from the panel or on 12 and 24 volt systems harness and color coded wires connections Speci cations relay synchronization module shall be an i3 Series model number RRS MOD listed Underwriters Laboratories as a smoke detector The module shall allow all 2 wire and 4 i3 Series detectors equipped with a sounder on loop to sound when one alarms The module shall a switch to toggle between coded mode and mode When in coded mode the module synchronize the i3 sounders on the loop to the input signal When in continuous mode module shall synchronize the i3 sounders on the to the ANSI S3.41 temporal coded pattern In coded or continuous modes the RRS MOD shall permit sounders to be silenced at the The RRS MOD module shall operate between and 35 VDC and shall provide 18 AWG stranded conductors connected to a quick connect RRS MOD reversing relay synchronization enhances the operation of 2 and 4 wire i3 detectors equipped with a sounder Ease RRS MOD includes a Velcro attachment for installation into the re alarm control panel A quick connect harness and color coded simplify connections RRS MOD design is exible to accommodate any application The RRS MOD is compatible both 2 and 4 wire i3 series detectors operating 12V and 24V systems The module can be used either bell alarm alarm relay or NAC outputs its eld selectable switch accommodates both and continuous alarm signals Inspection meet re alarm requirements the RRS MOD all i3 sounders on a loop when one alarms the RRS MOD synchronizes the output the i3 sounders regardless of whether the panel signal is continuous or coded to ensure a clear signal reserves the right to make changes at any time without notice in prices colours materials components equipment speci cations and models and also to discontinue models TO BE USED FOR INSTALLATION PURPOSES NUMBER Speci cations Voltage Speci cations Temperature Range 0 V V V 2.5 inches 63 mm 2.5 inches 63 mm 1 inch 25 mm System Triggered from Alarm Bell Circuit Operating Current mA Contact Rating A 35 VDC Humidity Range to 85 non condensing Connections AWG stranded tinned 16 long System Triggered from Alarm Relay Contact diagrams represent common wiring methods to the RRS MOD manual for additional con gurations LISTED signal alarm state POWER LISTED Contact POWER IN OUT IN OUT RA RA IN OUT IN OUT RA RA IN OUT IN OUT RA RA IN OUT IN OUT RA RA Information Number Description relay synchronization module for i3 series smoke detectors TO BE USED FOR INSTALLATION PURPOSES by Interchange Way Ontario L4K 5W3 905 660 4655 905 660 4113 Witmer Industrial Estates Falls NY 14305 Free 888 660 4655 Toll Free 888 660 4113 page http www mircom com Email mail mircom com 5149 1