Mircom CAT-5156 MS-700 Series Manual Stations (English)

METAL FIRE ALARM STATION SERIES or Dual Action models Stage or Dual Stage models resettable connectors plated SPST contacts auxiliary contacts red enamel nish breakrod on standard single gang box Mircom BB surface metal backbox or BB 700WP weather backbox in English and Bilingual versions MS 700 Series is operated by pulling the handle on front of the station The unit is reset by opening the with the key placing the handle in the normal position and re locking the station On the dual models the push bar rotates inward allowing the handle to be grasped in a one handed motion MS 702 two stage version also provides a key which is accessible after the handle has been Operation of the key switch when connected a separate general alarm circuit will initiate the stage of a two stage alarm signalling system cations manual station shall be Mircom MS 700 Series instructions shall be in raised English or and French lettering and the unit shall be of high quality die cast metal and nished red enamel paint to provide quick identi cation the handle shall initiate immediate operation of alarm detection circuit In addition those stations in a two stage system shall come equipped with internal key switch designed to operate the 2nd stage initiating circuit All manual re alarm stations be installed to comply with the Canadian Electrical CSA 22.1 and CAN ULC S524 01 Standard for of Fire Alarm Systems Final acceptance subject to the local authority having jurisdiction Action Manual Station Action Manual Station MS 700 Series Manual Stations provide re reporting These high quality die cast manual stations are available in either single dual action con gurations with SPST contacts and strip connections The normally open contact closes when the manual station is activated is for 1 amp 30 VDC The contacts are gold plated avoid the risk of corrosion MS 700 Series Manual Stations are available in different con gurations as either single or dual devices MS 701 is a single action single stage manual Model MS 710 is a single stage dual action station The MS 702 two stage is similar the MS 701 single stage except it contains an General Alarm G A N O switch For safety the G A switch is only accessible after the has been pulled A special key is supplied each unit models are available with key resets terminal SPST gold contacts and CAT 30 lock keys The units mount on a standard single gang Mircom BB 700 surface metal backbox or weather proof backbox MS 700U Series Manual Stations are listed for applications when used with the BB 700WP reserves the right to make changes at any time without notice in prices colours materials components equipment speci cations and models and also to discontinue models TO BE USED FOR INSTALLATION PURPOSES NUMBER cations Rating Station Dimensions Wiring Diagrams MS 702 and MS 710 ONLY Amp 30 VDC 0.1 Amp 125 VAC H x 3.5 W x 2.0 D with raised white letters white manual bar with raised black letters and MS 715 Block NEXT STATION END OF LINE NEXT STATION END OF LINE ONLY NOTES Switch Switch NOTES KEYSWITCH ONLY SWITCH and MS 708 Switch 1 Block Mount Backboxes Surface Mount Backbox H x 3.6 W x 2.0 D Switch 2 Keyswitch MS 708 Model Only NOTES Weatherproof Mount Backbox H x 3.6 W x 2.2 D as shown so that supervision of connections is maintained station to 2 x 4 x 2 outlet box size No 12 AWG Normally Open operation cut the NC wire Normally Closed operation cut the NO wire shown in the Station Closed position Information Stage Single Action Manual Station Bilingual Stage Single Action Manual Station Bilingual Stage Single Action Manual Station c w one additional Form SPDT Contact Bilingual Stage Dual Action Manual Station Bilingual Stage Dual Action Manual Station c w one additional Form SPDT Contact Bilingual Add suf x for English only models Stage Single Action Manual Station c w 2 Form Contacts Stage Single Action Manual Station c w 2 Form Contacts and Key Switch 700 Interior Surface Mount Backbox Red Finish 700 Weatherproof Surface Mount Backbox Red Finish TO BE USED FOR INSTALLATION PURPOSES by Interchange Way Ontario L4K 5W3 905 660 4655 905 660 4113 Witmer Industrial Estates Falls NY 14305 Free 888 660 4655 Toll Free 888 660 4113 page http www mircom com Email mail mircom com 5156 6