Mircom CAT-5224 CNSIS-204 Non Supervised Signal Isolator Module (English)

NON SUPERVISED SIGNAL ISOLATOR MODULE CNSIS 204 for installations where disconnection or damage to an in suite audible device will interfere with the ability of audible devices other dwelling units public corridors or suites sound on an alarm with bells and horns 4 non supervised isolator outputs the in suite faults but does not indicate trouble on the re alarm control panel in a 4 square electrical box CNSIS 204 Non Supervised Signal Module is designed for installations where of or damage to an in suite audible will not interfere with the ability of audible in other dwelling units public corridors or to sound on an alarm The CNSIS 204 mounts a 4 square electrical box CNSIS 204 provides four non supervised outputs Under this con guration if a short open circuit occurs the isolator disconnects the device from the circuit but it does not indicate trouble on the re alarm control panel In this guration an open circuit in the suite does not a trouble on the control panel Instructions of the CNSIS 204 Signal Isolator Module SQUARE ELECTRICAL BOX DEEP PLASTER RING ISOLATOR PLATE reserves the right to make changes at any time without notice in prices colours materials components equipment speci cations and models and also to discontinue models TO BE USED FOR INSTALLATION PURPOSES NUMBER Wiring Diagram FIRE ALARM PANEL Wiring of the CNSIS 204 Non Supervised Signal Isolator Module 4 3 2 1 MODULE NOTE 5 DEVICES 100mA MAX PER SUITE BELLS AND HORNS CIRCUIT NOTE 4 4 3 2 1 MODULE DEVICES 100mA MAX PER SUITE BELLS AND HORNS NOTE 4 NEXT SIGNALLING DEVICE ISOLATOR EOL RESISTOR OR RETURN TO PANEL FOR CLASS A WIRING Do not exceed 100mA per suite For proper system operation refer to detailed installation instructions provided with control panel and local installation standards Wiring supervised by the re alarm control panel as per code Unsupervised wiring Refer to the signal device instructions for wiring gauge information Mircom recommends that all suite isolators should be mounted outside of the suite they are protecting does not recommend the installation of unsupervised signal circuits Mircom recommends that follow proper measures for re procedures for their premises Information Signal Isolator Module TO BE USED FOR INSTALLATION PURPOSES by Interchange Way Ontario L4K 5W3 905 660 4655 905 660 4113 Witmer Industrial Estates Falls NY 14305 Free 888 660 4655 Toll Free 888 660 4113 page http www mircom com Email mail mircom com 5224 6