Mircom CAT-5317 PAM Series Multi-Voltage Control Relays (English)

PAM SERIES MULTI VOLTAGE CONTROL RELAYS LEDS to indicate when the relay coil energized installation operation for applications where remote relays are for control or status feedback for use with HVAC Temperature Control Alarm Security Energy Management Control Systems and Building Automation PAM 2 Relay provides 7.0 A form contacts relay may be energized by one of two input 12VDC or 24VDC The input voltages polarity sensitive and diode protected PAM 2 contain a red LED which indicates when the coil is energized PAM 3 Relay provides a 3.0 A form A contact relay may be energized across a wide voltage from 9VDC to 40VDC making it ideal for and 24VDC EOL circuits The 19.3 mA current is constant across the operating The input voltage is polarity sensitive and PAM 4 Relay provides 10.0 A form contacts relay may be energized across a wide voltage from 9VDC to 40VDC making it ideal for and 24VDC EOL circuits The 15mA current is constant across the operating PAM Series Relays are encapsulated multi devices with ying leads that offer versatile performance in a convenient package Several the versions contain a red LED which indicates the relay coil is energized The PAM Series are packaged with a self tapping screw and a of double sided tape for easy installation almost The relays are also packaged with wire to aid installation Relays are ideal for applications where remote are required for control or status feedback They suitable for use with HVAC Temperature Control Alarm Security Energy Management Lighting Systems and Building Automation Systems PAM 1 Relay provides 10.0 A form contacts relay may be energized by one of three input 24VDC 24VAC or 120VAC The input are polarity sensitive and diode protected Relays contain a red LED which indicates the relay coil is energized This relay may not suitable for continuous duty use at 120VAC for periods of time For these applications refer to our RIC Series products reserves the right to make changes at any time without notice in prices colours materials components equipment speci cations and models and also to discontinue models TO BE USED FOR INSTALLATION PURPOSES NUMBER Diagrams not be suitable for continuous duty use 120VAC for extended periods of time cations Number Voltage Led Indicator Requirement Con guration SPDT dry form Ratings contact rating power factor to 40VDC SPDT dry form SPST dry form SPDT dry form 35 PF 35 PF ying leads 18 AWG provided to 120 to 49 35 PF 35 PF 35 PF ying leads 18 AWG provided 35 PF 35 PF ying leads 18 AWG provided to 120 to 120 to 49 to 49 potted sealed with ying leads mounting screw hole and self tapping screw provided Double sided tape provided 38mm H x 1.00 W x 0.80 20mm 38mm H x 1.00 W x 0.90 23mm D 38mm H x 1.00 W x 0.90 23mm D 38mm H x 1.00 W x 0.90 23mm D to 40VDC ying leads 18 AWG provided to 120 to 49 Leads Temperature 100 RH condensing Information Number relay Single SPDT 10.0 A form contact relay Single SPDT 7.0 A form contact Relay 3.0 A form A contact relay Single SPDT 10.0 A form contact TO BE USED FOR INSTALLATION PURPOSES by Interchange Way Ontario L4K 5W3 905 660 4655 905 660 4113 Witmer Industrial Estates Falls NY 14305 Free 888 660 4655 Toll Free 888 660 4113 page http www mircom com Email mail mircom com 5317 1