Mircom CAT-9524 - ALCN-960MISO D - Quad Loop Adder for MGC Devices

QUAD LOOP ADDER MOTHER DAUGHTER BOARD ALCN 960D ALCN 960MISO allows for two 2 SLCs ofMIX 4000 devices to be connected to the FleX Net panel ALCN 960D can be connected to ALCN 960MISOto add additional two 2 SLCs using only one 1 internal bus Any combination of MIX 4000 series devices upto 240 can connected on a single SLC Up to seven 7 ALCN 960MISO and seven 7 ALCN can connected on a FleX Net panel All circuits are power limited and must use type FPL or FPLP power limited cable For more information refer to wiring instructions inthe Fire Alarm Manual LT 894 Wiringis identical to provided for ALCN 792M ALCN 792MISO and ALCN 960MISO Quad Loop Adder mother board and the daughter board are components of the FleX Net that allows MIX 4000 series devices to be added to project ALCN 960MISO ALCN 960D connect on the internal bus mount within the main panel enclosure SLCs may be configured for Class A or Class B wiring the need for any additional modules is provided by the FleX Net main board Ratings with ALCN 960D limited VDC 400mA MAX 10kHz frequency loop resistance 40 ohms Consumption mA mA Information Loop Adder Module Board Interchange Way Vaughan ON L4K 5W3 905 660 4655 Fax 905 660 4113 Witmer Industrial Estates Niagara Falls NY 14305 Free 888 660 4655 Fax Toll Free 888 660 4113 INFORMATION IS FOR MARKETING PURPOSES ONLY AND INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY complete and accurate technical information relating to performance testing and certification refer to technical literature This document intellectual property of Mircom The information is subject to change Mircom without notice Mircom does not represent or warrant correctness completeness NUMBER 9524 0