Mircom LT-989 FX-2000 Addendum (English)

Addendum for LT 657 FX 2000 Installation and Instruction Manual are some new features incorporated into the FX 2000 Fire Alarm Control Panel We have a new UUKL feature on the FX 2000 Configurator used only in conjunction with the FDG 008 and FDX Fan Damper Controller modules Refer to separate manual LT 966 for all the details In each UUKL relay set the user could set up the of operation If this option is selected the panel will still go into directly if any detector is tripped The only difference is that if a relay which is part of the smoke control is for of operation that relay will only activate after a configurable number of detectors are active operation is meant to be used in an atrium where multiple detector operation is required to start the smoke operation but the signaling within the building is based upon the first detector to activate New feature for Output Circuit Delay Operation The relay function associated with an alarm initiating circuit may delayed There is a Output Delay timer associated with this refer to Table below This is programmed using the Configuration software The Output Delay timer is limited to elevator recall purpose only TO USERS INSTALLERS AUTHORITIES HAVING JURISDICTION AND OTHER INVOLVED PARTIES product incorporates field programmable software In order for the product to comply with the requirements in the for Control Units and Accessories for Fire Alarm Systems UL 864 certain programming features or options be limited to specific values or not used at all as indicated below feature or option in UL 864 Y N Possible settings permitted in UL 864 Output Timer seconds maximum due worst case loop delay of seconds seconds Rev 0 2009