Mircom MIX-4010 MIX-4010-ISO Photoelectric Smoke Sensor Data Sheet (English)

PHOTOELECTRIC SMOKE SENSORS MIX 4010 ISO Any combination of MIX 4000 series devices up to 240 be connected on a single SLC Different LED colors for Alarms and Troubles Detection of smoke using advanced software algorithms Protection against nuisance alarms caused by dust or other debris Multiple sensitivity settings Compatible with the full series of MIX 4000 input and modules The device can be secured by a unique Anti Tamper Address is set with the hand held device programmer MODEL OPTION Built In short circuit isolator MIX 4010 ISO MIX 4010 MIX 4010 ISO smoke detector is a hardwired that continuously monitors the environment to provide warning of a fire condition and communicates with the using a fully digital protocol MIX 4010 MIX 4010 ISO works with an MGC compatible panel supporting high rates of information exchange reliable and secure bi directional communication detector is addressed and programmed using the hand held device Addresses can be selected from range of 1 240 detector ships with a dust cover to protect the device installation and prior to commissioning tri color LEDs on the device provide 360 degrees of visibility remote LED indicator can be wired directly to the sensor Open style mounting bases offer easy wiring and low locking 4 or 6 base options available Remote output can be controlled by the panel MIX 4010 ISO is equipped with a bi directional short isolator to protect against wiring faults and loop Low standby current Base has detachable tab for labeling device address Leverages interrupts to quickly report alarm conditions to alarm control panels Magnet test option helps with commissioning and TO BE USED FOR INSTALLATION PURPOSES INFORMATION IS FOR MARKETING PURPOSES ONLY AND INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY NUMBER Operating Voltage Alarm Current Current Range range on terminals to 30VDC LED on to 100 0 to 37.8 to 93 Non condensing to 12 AWG LED colors Steady on Flash Steady on Level Typical 1 2 3 4 condition condition condition Most Sensitive level level level Sensitive Level Information Smoke Detector Non Isolated Smoke Detector with short circuit isolator Non Isolated with built in short circuit isolator Detector Non Isolated Detector with built in short circuit isolator Series Addressable Device Programmer Detector Base Detector Base Interchange Way Ontario L4K 5W3 905 660 4655 905 660 4113 Witmer Industrial Estates Falls NY 14305 Free 888 660 4655 Toll Free 888 660 4113 INFORMATION IS FOR MARKETING PURPOSES AND NOT TO DESCRIBE THE TECHNICALLY complete and accurate installation testing and certification refer to technical This document contains intellectual property of Mircom information is subject to change by Mircom without notice does not represent or warrant correctness or completeness relating 9501 3