Mircom MIX-4020 MIX-4020-ISO Multi-Sensor Detector (English)

MULTI SENSOR DETECTOR MIX 4020 ISO Any combination of MIX 4000 series devices up to 240 be connected on a single SLC Different LED colors for Alarms and Troubles Detection of smoke using advanced software algorithms complementary thermal sensor Advanced protection against nuisance alarms caused by insects or other debris Multiple sensitivity settings Compatible with the full series of MIX 4000 input and modules The device can be secured by a unique Anti Tamper The address is set with the hand held device programmer MODEL OPTION Built in short circuit isolator 4020 ISO Open style mounting bases offer easy wiring and low locking 4 or 6 base options available Remote output can be controlled by the panel MIX 4020 ISO is equipped with a bi directional short isolator to protect against wiring faults and loop Low standby current Base has detachable tab for labeling device address Leverages interrupts to quickly report alarm conditions to alarm control panels Magnet test option helps with commissioning and MIX 4020 ISO MIX 4020 MIX 4020 ISO multi criteria detector is a sensor that continuously monitors the environment provide early warning of a fire condition and communicates the panel using a fully digital protocol MIX 4020 MIX 4020 ISO provides a higher level of alarm rejection as compared with single criteria leveraging both smoke and heat sensing elements MIX 4020 MIX 4020 ISO works with an MGC compatible panel supporting high rates of information exchange reliable and secure bi directional communication detector is addressed and programmed using the hand held device Addresses can be selected from range of 1 240 detector ships with a dust cover to protect the device installation and prior to commissioning tri color LEDs on the device provide 360 degrees of visibility remote LED indicator can be wired directly to the sensor TO BE USED FOR INSTALLATION PURPOSES INFORMATION IS FOR MARKETING PURPOSES ONLY AND INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY NUMBER Specifications Operating Voltage 15 to 30VDC Alarm Current Current Range range on terminals 22 to 12 AWG LED on to 100 0 to 37.8 to 93 Non condensing LED colors Steady on Flash Steady on condition condition condition Detection Settings 57 with rate of rise as per UL268 Level Typical 1 2 3 4 Sensitive level level level Sensitive Level Information Smoke Detector Non Isolated Smoke Detector with short circuit isolator Non Isolated with built in short circuit isolator Detector Non Isolated Detector with built in short circuit isolator Series Addressable Device Programmer Detector Base Detector Base Interchange Way Ontario L4K 5W3 905 660 4655 905 660 4113 Witmer Industrial Estates Falls NY 14305 Free 888 660 4655 Toll Free 888 660 4113 INFORMATION IS FOR MARKETING PURPOSES AND NOT TO DESCRIBE THE TECHNICALLY complete and accurate installation testing and certification refer to technical This document contains intellectual property of Mircom information is subject to change by Mircom without notice does not represent or warrant correctness or completeness relating 9502 3