Mircom MIX-4050 Sync Module Data Sheet (English)

SYNC MODULE The module can synchronize one 1 class A or two 2 B NAC lines without the need for programming The module is fail safe and will provide power to the NAC by default through a relay The module has an isolated sync input output to link up to modules together Mounts in a standard 4 square or double gang electrical box Supports two stage alarm function of Alert 20 strokes minute and Evac temp 3 MIX 4050 Sync Module is designed to be used with MGC devices Sync Module is used to synchronize the strobe flashes the audio signal pattern The same protocol is used to the horn while maintaining the strobe flashes It also two stage alarm function of Alert 20 strokes per and Evac temp 3 sync module is installed between a fire alarm system line and the NAC devices When there is no alarm the line connected to the sync module is off and no power is to the device When the NAC line turns on the device powered and becomes operational to 20 modules can be interconnected to achieve without the need to program or select a unit An LED will indicate activation and master slave Master will flash intermittently while slave will flash at fast rate Correct interconnection of devices can be checked ensuring only one device flashes at the master rate silence input can be used to silence the NAC devices on MIX 4050 without affecting the other MIX 4050 devices are interconnected module can synchronize one 1 class A or two 2 class NAC lines without the need for programing is a hardware only device and does not require or setting of switches or jumpers The Sync module uses no power during standby Does not require addressing An LED will indicate activation and master slave status The Sync module is compatible with any UL ULC panels and power supplies capable of providing 24VDC or FWR for NACs The interconnected MIX 4050 devices synchronize without the need of programming or setting Devices MGC FH 400 Series Horns Strobes MGC FHS 400 Series Horn Strobes MGC SPPS Series Speakers Speaker Strobes TO BE USED FOR INSTALLATION PURPOSES INFORMATION IS FOR MARKETING PURPOSES ONLY AND INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY NUMBER regulated 16 to 33V DC filtered or FWR 25mA average for class A 2 x 3A for class B lines Specifications Voltage supply current lines current stage and Silence input activation voltage 16 to 33V DC filtered or FWR stage and Silence input current link Range range on all terminals max 33VDC limited current and voltage to 120 0 to 49 to 93 Non condensing H x 4.25 W x 1.125 D 4 square by 2 1 8 deep box or BB 400 Electrical Box to 12 AWG module module MODULES INTERCONNECTION 20 MODULES MAXIMUM more details refer to Installation Manual LT 6151 Information Module White Finish mount back box Interchange Way Ontario L4K 5W3 905 660 4655 905 660 4113 Witmer Industrial Estates Falls NY 14305 Free 888 660 4655 Toll Free 888 660 4113 INFORMATION IS FOR MARKETING PURPOSES AND NOT TO DESCRIBE THE TECHNICALLY complete and accurate installation testing and certification refer to technical This document contains intellectual property of Mircom information is subject to change by Mircom without notice does not represent or warrant correctness or completeness relating 9511 3