Notifier 8-Inch Dual Voltage Speaker for Fire and General Signaling Systems

8 Inch Dual Voltage Speaker Fire and General Systems SPCW8 8 ceiling speaker with listed enclosure provides solution for ceiling mount applications with tap setting range 1 8 Watt and 8 Watts It provides a solution for almost voice need high dB output reduces the number of speakers required sound and intelligibility The SPCW8 is designed for high sound output with low total harmonic distortion to high fidelity sound output clear audibility is designed to meet life safety needs from to emergency communication messages With its wide fre range it can also be used for general signaling such as and background music The SPCW8 speaker is listed ANSI UL 1480 CAN ULC S541 and CSA C22.2 No 205 for public mode and general signaling applica as well as ANSI UL 2043 plenum rated Speaker is suit for indoor and damp installations SPCW8 can be surface mounted with the included back or flush mounted with optional accessory SB SPC8 The sold separately offers support for ceiling tile instal and knockouts are provided for conduit entry and compatible with plenum rated cable and plenum whip flex Voltage and speaker tap settings via jumper connection Field selection of speaker voltage 25 and 70.7 Vrms and settings 1 8 1 2 4 and 8 watts For use with separately sold tile support bracket SB SPC8 Flush and ceiling tile mounting with use of ceiling tile UL and ULC listed Broad temperature range 32 to 120 0 to 49 Accepts wire up to 12 AWG Speaker ships with included back can Specifications SPCW8 8 dual voltage speaker and enclosure shall using SB SPC8 mounting bracket sold separately The can be flush mounted with supplied back can or ceil mounted with back can and SB SPC8 tile bridge speaker shall be a SPCW8 dual voltage transformer capable of operating at 25.0 or 70.7 nominal Vrms field selectable tap settings from 1 8 to 8 Watts It should listed to ANSI UL 1480 CAN ULC S541 and CSA C22.2 205 requirements for public mode and general signaling as well as ANSI UL 2043 plenum rated Speaker suitable for indoor and damp installations The speaker shall a frequency range of 400 to 4,000 Hz and shall have an temperature between 32 and 120 0 and The speaker shall have power taps and voltage that are by jumper connection Devices Speaker Specifications Operating Temperature 32 to 120 0 to 49 Humidity Range 10 to 93 non condensing Dimensions Ceiling Mount SPCW8 Speaker with Grill Diameter 12.8 in 325.1 Depth 2.7 in 68.6 mm SPCW8 Speaker with Back Can Diameter 12.8 in mm Depth 4.2 in 106.7 mm SB SPC8 Tile Support Bracket Length 23.75 in 603.3 Width 4.125 in 104.8 mm Diameter Opening in 273.1 mm Specifications Nominal Voltage speakers 25 Volts or 70.7 Volts nomi Maximum Supervisory Voltage speakers 50 VDC Operating Voltage Range includes fire alarm panels built in sync 8 to 17.5 V 12 V nominal or 16 to 33 V V nominal Frequency Range 400 to 4,000 Hz Fire Alarm 200Hz General Signaling Power 1 8 1 2 4 8 watts Terminal Wire Gauge 12 to 18 AWG Current Draw Data Sound Output Reverberant 10 ft Anechoic 10 ft W W W W W W W 2 3 2017 Page 1 of 2 Listings and Approvals listings and approvals below apply to L series devices In cases certain modules or applications may not be listed certain approval agencies or listing may be in process factory for latest listing status UL ULC Listed S4048 FM Listed CSFM Line Information model devices are ULC listed 8 Dual Voltage Speaker White Tile Support Bracket White Drawings DIMENSIONS MOUNTING CEILING MOUNT SPEAKER BACK CAN AND SB SPC8 TILE BRIDGE 5 HOLES 8 TAB 4 is a registered trademark of Honeywell International Inc by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Notifier Phone 203 484 7161 FAX 203 484 7118 2 of 2 DN 60915 A 2 3 2017