Notifier AMPS-24 E Power Supply for the NFS-3030, NFS2-3030 and NCA-2
File Preview
Click below to download for free
Click below to download for free
File Data
Name | notifier-amps-24-e-power-supply-for-the-nfs-3030-nfs2-3030-and-nca-2-7508643129.pdf |
---|---|
Type | |
Size | 924.52 KB |
Downloads |
Text Preview
AMPS 24 E Supply the NFS 3030 NFS2 3030 and NCA 2 AMPS 24 E is an addressable power supply and charger with up to three 24 VDC outputs It operates in FlashScan or CLIP Classic Loop Interface Protocol with the NFS 3030 NFS2 3030 Fire Alarm Control Panel It can also be used as the primary power supply for NCA 2 Network Control Annunciator Addressable by NFS 3030 NFS2 3030 FACP Selectable charging current charges 7 AH to 200 AH batter Signaling Line Circuit SLC interface Trouble bus input for use with normally open dry contacts or circuit USB Type B connector for programming installation param Brownout detection Battery battery charger supervision Secondary Power Auxiliary Outputs 24V 0.5A and 5V AC loss detection and AC loss delay reporting Mounts in a CAB 4 Series enclosure EQ Cabinet Series BB 25 BB 100 or BB 200 Battery Backbox Primary AC power 110 120 VAC 50 60 Hz input 5 A maximum 220 240 VAC 50 60 Hz input 2.5 A maximum MAIN 24V Output filtered power limited power Refer to for configuration current information 24V TB 1 on Control Unit Current AUX 24V TB3 on Main Unit with TB2 on CPS Max Current Setting Size Bat Bat 1 2 Maximum current for all AUX 24 volt outputs Note that TB2 on CPS 24 is to 0.5A AUX 24V provides filtered power limited power for addi components Refer to table above for configuration information Secondary power battery charging circuit Current limited lead acid battery charger which will charge 7 to 200 batteries charging current 1.0 A 2.0 A or 5.0 A Secondary power auxiliary outputs Wire sizes 10 AWG 5.26 mm to 22 AWG 0.326 mm Battery fuse F2 15 A fast acting Shipping Weight 4.25 lb Listings and Approvals listings and approvals apply to the AMPS 24 E power In some cases certain modules may not be listed by approval agencies or listing may be in process Con factory for latest listing status UL S635 ULC CS118 City of Chicago City of Denver MEA 345 02 E CSFM 7165 0028 224 FM Approved FDNY 6026 Line Information Addressable power supply battery charger Same as AMPS 24 220 240VAC operation 10 15 09 Page 1 of 2 is a registered trademark of Honeywell International Inc by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Notifier Phone 203 484 7161 FAX 203 484 7118 in the U S A 2 of 2 DN 6883 B 10 15 09