Notifier MP120K(A) Series 120 VAC Adapter Mounting Plate

MP120K A Series VAC Adapter Mounting Plate Sensor MP120K A mounting plate is designed to 120 VAC to power SpectrAlert Advance horns strobes chimes and chime strobes MP120K A features an easy plug in design and has been with a power supply that converts the 120VAC to nominal FWR The mounting plate may be used for indoor or out applications For indoor applications complete field wir and attach the mounting plate to a four inch square back Attach the horn strobe or horn strobe chime or chime to the mounting plate by inserting the product tabs in mounting plate grooves The device will rotate into posi locking the product pins into the mounting plate termi The device will temporarily hold in place with a catch until is secured with a captured mounting screw For outdoor the MP120K A must be installed using the Advance weatherproof back box and outdoor listed appliance Operates at 120 VAC Indoor Outdoor use Compatible with all two wire SpectrAlert Advance devices Compatible with 4 4 21 8 electrical boxes and Sensor weatherproof back box Plug in design Paint cover provided to protect wiring terminals Specifications 120 VAC mounting model MP120K A shall be listed to UL 464 for fire pro signaling systems The mounting plate shall power a SpectrAlert Advance horn strobe horn strobe or chime strobe from a 120 VAC supply converted to 24V FWR For indoor applications the mounting plate be installed in a 4 4 21 8 junction box for out applications the mounting plate shall be installed using proper SpectrAlert Advance outdoor weatherproof back and outdoor listed notification appliance SPECIFICATIONS Operating Temperature to 151 to Range 10 to 93 non condensing indoor products Voltage Regulated 120 VAC Voltage Range 96 VAC Draw From AC Line 150 mA max Devices Line Information 120 VAC Adapter Mounting Plate MP120K A may used with any of the following products at all horn and settings P2R P2RH P2RK P2RHK P2W P2WH SR SRK SRHK SW SWH PC2R PC2RH PC2RK PC2W PC2WH SCR SCRH SCRK SCRHK SCWH HR HRK HW SR P SW P SRH P SWH P P2W P P2RH P P2WH P SCR P SCW P SCRH P PC2R P PC2W P PC2RH P PC2WH P SR SP P2R SP P2RH SP SCW SP SCWH SP PC2W SP CHR CHW CHSR CHSW Same as MP120K but with ULC listing suffix indicates ULC Listed Listings and Approvals listings and approvals apply to the modules specified in document In some cases certain modules or applications not be listed by certain approval agencies or listing may in process Consult factory for latest listing status UL Listed S4011 ULC Listed S4011 CSFM 7300 1653 195 MEA 582 06 E 5 17 13 Page 1 of 2 and System Sensor are registered trademarks of and Advance is a trademark of Honeywell International Inc by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Notifier Phone 203 484 7161 FAX 203 484 7118 2 of 2 DN 60522 B 5 17 13