Notifier PMB-AUXPMB-AUX-RTO Power Supplies for N16 Series

PMB AUX PMB AUX RTO Power Supplies for the N16 Series FACP PMB AUX and PMB AUX RTO are addressable power supplies battery chargers compatible with the NOTIFIER INSPIRE Series Fire Alarm Control Panel FACP These power supplies four power limited NAC outputs which can be configured for Class A or Class B wiring two 24VDC auxiliary power and a remote sync input maximum of two 2 PMB AUX RTO power supplies can be in a N16x series panel or compatible enclosure The PMB supply for the N16 FACP supports a maximum of five loop One or two PMB AUX RTO power supplies can be added on total number of loop cards battery charging and alarm requirements Addressable on the CLP Bus Selectable charging current charges 7 AH to 100 AH batteries USB Type B connector for programming installation parameters Battery battery charger supervision Secondary Power Auxiliary Outputs 24V 1.5A each Mounts in a CAB 5 or CAB 4 Series enclosure Line Information Addressable power supply battery charger for N16 panels chassis mounted for installation in a CAB 5 Series Addressable power supply battery charger for N16 panels chassis mounted for installation in a CAB 4 Series Listings and Approvals file number s below reference the specific listings for the mod in this document In some cases certain modules or applica may not be listed by certain approval agencies or listing may in process Consult NOTIFIER for latest listing status UL S635 FM Approved CSFM 7165 0028 0516 FDNY COA 001761 and Codes listings and approvals below apply to the PMB AUX PMB In some cases certain modules or applications may not listed by certain approval agencies or listing may be in process factory for latest listing status UL 864 10th edition NFPA 72 National Fire Protection Association 10 15 2021 Page 1 of 2 AC power 2A 120VAC 50 60 HZ 1A 240VAC 50 60 Hz 24VDC aux outputs Power limited Class 2 24V 1.5A each Applications Aux Power Aux 1 Class A B Aux 2 Class B NAC outputs power limited Special Applications Class A B Power Class D Door Holder Power 1.5A Special Applica Class A B Aux Power UZC CLP Bus connections carry CLP data and internal 24V power the SLM 318 loop cards and the core board on the N16 CPU PMB power supplies use only the CLP data Secondary power battery charging circuit Sealed lead acid battery charger which will charge 7 100 AH Charging current 1A 2A and 4.25A Charging voltage 27.6VDC nominal PMB battery charging configurations available configured VeriFire Tools No charger Low 7 26AH Medium 33 55AH High 100AH Wire sizes 10 AWG 5.26 mm to 22 AWG 0.326 mm Shipping Weight 9 lbs 27.7kg Clintonville Road CT 06472 document is not intended to be used for installation purposes try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice INSPIRE is a trademark of and NOTIFIER is a registered of Honeywell International Inc by Honeywell International Inc All rights reserved Unauthorized of this document is strictly prohibited of Origin USA