Notifier XP6-C(A) Six Circuit Supervised Control Module and SYNC-1 Accessory Card

Circuit Supervised Control Module cid 2 SYNC 1 Accessory Card H 353 Addressable Devices XP6 C six circuit supervised control module intelligent alarm systems with supervised monitoring wiring to load devices that require an external power supply operate such as horns strobes or bells Each module is for switching applications involving AC DC or audio require wiring supervision Upon command from the panel the XP6 C will disconnect the supervision and the external power supply across the load device first module is addressed from 01 to 154 while the remain modules are automatically assigned to the next five higher Each XP6 C module has terminals for connection an external supply circuit for powering devices on its notifi appliance circuit NAC One or multiple power supplies amplifiers may be used Provisions are included for disabling a maximum of three addresses XP6 C module features a short circuit protection monitor protect the external power supply against short circuit con on the NAC When an alarm condition occurs the relay connects the external supply to the NAC will not be to close if a short circuit condition currently exists on NAC Additionally an algorithm is incorporated to find when the module is active The XP6 C module will all circuits that are not shorted to find the NAC with the XP6 C module has panel controlled green LED indica The panel can cause the LEDs to blink latch on or latch SYNC 1 accessory card provides the XP6 C with functionality with compatible System Sensor and SpectrAlert Advance audio visual devices Six addressable Style B Class B or three addressable D Class A outputs that function as notification appli circuits Removable 12 AWG 3.31 mm to 18 AWG 0.821 mm terminal blocks Status indicators for each point Unused addresses may be disabled up to 3 Rotary address switches FlashScan or CLIP operation Optional SYNC 1 accessory card for SpectrAlert and Advance devices Mount one or two modules in a BB XP cabinet optional Mount up to six modules on a CHS 6 chassis in a CAB 3 CAB 4 Series EQ Series or BB 25 cabinet Mounting hardware included current 2.25 mA SLC current draw with all used if some addresses are disabled the standby decreases non coded current 35 mA assumes all six NACS have been once and all six LEDs solid ON range 32 to 120 0 to 49 for UL appli to 55 for EN54 applications 10 to 85 noncondensing for UL applications to 93 noncondensing for EN54 applications 6.8 172.72 mm high x 5.8 147.32 mm wide 1.25 31.75 mm deep weight 1.1 lb 0.499 kg including packaging options CHS 6 chassis BB 25 cabinet BB XP CAB 3 CAB 4 series backboxes and doors or EQ cabinet gauge 12 AWG 3.31 mm to 18 AWG 0.821 mm is shipped in Class B position remove shunt for A operation SLC wiring resistance 40 or 50 ohms panel NAC wiring resistance 40 ohms rating per circuit to 50 W 70.7 VAC 50 W 25 UL applications only ratings 3.0 A 30 VDC maximum resistive non coded 2.0 A 30 VDC maximum resistive coded 1.0 A 30 VDC maximum inductive L R 2 ms coded 0.5 A 30 VDC maximum inductive L R 5 ms coded 0.9 A 70.7 VAC maximum UL only resistive non 0.7 A 70.7 VAC maximum UL only inductive PF 3 4 2015 Page 1 of 2 Listings and Approvals listings and approvals apply to the modules specified in document In some cases certain modules or applications not be listed by certain approval agencies or listing may in process Consult factory for latest listing status UL Listed S635 XP6 C S3705 SYNC 1 ULC Listed S635 XP6 CA MEA Listed 43 02 E 226 03 E SYNC 1 FDNY COA 6121 FM Approved Local Protective Signaling CSFM 7300 0028 0219 XP6 C 7300 1653 0160 SYNC 1 Maryland State Fire Marshal Permit 2106 XP6 C devices See the documentation for your panel the NOTIFER Device Compatibility document Contact See also list of devices compatible with SYNC 1 Accessory Card SYNC 1 accessory card is designed to operate with the It works with the SpectrAlert and the SpectrAlert series of horns strobes and horn strobes to provide means of synchronizing the temporal coded horns synchro the one second flash timing of the strobe and silencing horns of the horn strobe combination over a two wire cir while leaving the strobes active Each SYNC 1 accessory is capable of synchronizing six Class B circuits or three A circuits load on a loop 3 A temperature 32 to 120 0 to 49 size 12 to 18 AWG 3.31 to 0.821 mm voltage range 11 to 30 VDC FWR filtered or Refer to notification appliance installation instruc for number of notification appliances and wire size A V devices The SYNC 1 Accessory Card is with all System Sensor SpectrAlert and SpectrAlert Audio Visual Devices that have synchronization Other manufacturers may be supported as well refer to the latest Device Compatibility Document 15378 SpectrAlert and SpectrAlert Advance products utilizing module below Line Information Six circuit supervised control module Same as above with ULC Listing Optional accessory card for synchronization of com System Sensor SpectrAlert horns strobes and horn Optional cabinet for one or two modules Dimen DOOR 9.234 23.454 cm wide 9.484 24.089 cm hinges x 12.218 31.0337 cm high x 0.672 cm deep BACKBOX 9.0 22.860 cm wide 9.25 cm including hinges x 12.0 30.480 cm high x 2.75 cm CHASSIS installed 7.150 18.161 cm wide x 7.312 18.5725 cm high interior overall x 2.156 cm deep overall Optional cabinet for up to six modules mounted on chassis below Dimensions DOOR 24.0 60.96 wide x 12.632 32.0852 cm high x 1.25 3.175 cm hinged at bottom BACKBOX 24.0 60.96 cm wide x 31.877 cm high x 5.218 13.2537 cm deep Chassis mounts up to six modules in a CAB 4 Series DN 6857 cabinet or EQ Series cabinet FlashScan SpectrAlert SpectrAlert Advance and Sensor are registered trademarks of Honeywell International Inc cid 2 by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Notifier Phone 203 484 7161 FAX 203 484 7118 in the U S A 2 of 2 DN 6924 C 3 4 2015