Potter INSTALLATION MANUAL 70V-1000 70V EXTENDER

NOTICE TO THE INSTALLER manual provides an overview and the installation instructions for the 70V 1000 module All terminals are power and should be wired in accordance with the requirements of NFPA 70 NEC and NFPA 72 National Fire Alarm Failure to follow the wiring diagrams in the following pages will cause the system to not operate as intended For information refer to the control panel installation instructions The module shall only be installed with listed control Refer to the control panel installation manual for proper system operation DESCRIPTION 70V 1000 module extends the output voltage to 70V on the DCA 5025 and DCA 10025 The 70V 1000 is equipped a stacker bracket for secure mounting TECHNICAL SPECIFICATIONS Current Current Voltage Temperature Range Humidity Range mA mA to 120 F 0 to 49 to 93 non condensing INSTALLATION 70V 1000 is connected to the DCA 5025 or DCA 10025 using an eight 8 pin ribbon cable The connection is and power limited The 70V 1000 must be mounted in the DCA enclosure Each card is equipped with bracket secure and accessible mounting 1 70V 1000 CONNECTION DIAgRAM PAGE 1 OF 1 A 3 21INSTALLATION MANUAL 70V 1000 70V EXTENDERPotter Electric Signal Company LLC St Louis MO Phone 800 325 3936 www pottersignal comfirealarmresources com