Potter INSTALLATION MANUAL FFT-RFH REMOTE FIREMAN’S HANDSET

NOTICE TO THE INSTALLER manual provides an overview and the installation instructions for the FFT RFH module All terminals are power limited should be wired in accordance with the requirements of NFPA 70 NEC and NFPA 72 National Fire Alarm Code to follow the wiring diagrams in the following pages will cause the system to not operate as intended For further refer to the control panel installation instructions The module shall only be installed with listed control panels to the control panel installation manual for proper system operation DESCRIPTION FFT RFH is remote fireman handset used to establish 2 way communication across phone circuits between remote areas and FFT 1000 In operation an FFT RFH Remote Fireman Handset is plugged into an FFT RFH Phone Jack which will ring at the FFT 1000 The operator can then pick up the master handset at the FFT select the corresponding switch and establish 2 way communication with the remote handset TECHNICAL SPECIFICATIONS Temperature Range Humidity Range to 120 F 0 to 49 to 93 non condensing INSTALLATION 1 FFT RFH CONNECTION PAGE 1 OF 1 A 3 21INSTALLATION MANUAL FFT RFH REMOTE FIREMAN HANDSETPotter Electric Signal Company LLC St Louis MO Phone 800 325 3936 www pottersignal comfirealarmresources com