Potter PPAD100-MIM Micro Input Module

Features One Class B contact monitoring input Small size allows mounting in most electrical boxes SLC Class a Class X Class B 6 pigtail wiring connections product includes a 5 year warranty UUKL Listed for Smoke Control paD100 MIM is used to monitor the status of an initiating that contain a normally open set of dry contacts The module enclosed in a plastic case to protect against inadvertent shorts and faults The case can be mounted using a single screw The has a status indicator LeD to indicate communication alarm condition In normal condition the LED flashes when the is being polled by the control panel When the input is activated LED will flash at a fast rate micro input module paD100 MIM is compatible with potter and AFC ARC series addressable fire alarm control panels the paD100 MIM is used to monitor pull stations and devices where the module is installed in an electrical box or behind the device being monitored B Specifications Voltage SLC Standby SLC alarm Input Circuit Wiring Resistance IDC Wiring of IDC Resistor Temperature Humidity no of Module per units to 120 0 to 49 to 93 non condensing Options 44.5mm L 1.36 43 11mm D 64mm deep single gang box Weight lbs page 1 OF 2 Input Module8830079 REV D 12 18Potter Electric Signal Company LLC St Louis MO Phone 800 325 3936 www pottersignal comfirealarmresources com the Address addressable SLC device must be assigned an address The address is set using the DIp switch located on the front of the paD100 MIM Before a device to the SLC loop take the following precautions to prevent potential damage to the panel or device power to the device is removed Field wiring is correctly installed Field wiring has no open or short circuits Diagram 1 FACP OR PREVIOUS AND TO NEXT DEVICE Information Input Module No NORMALLY OPEN DEVICE OHM REQUIRED 3005013 page 2 OF 2 REV D 12 18Potter Electric Signal Company LLC St Louis MO Phone 800 325 3936 www pottersignal comPAD100 MIMMicro Input Modulefirealarmresources com