Potter SB Series Conventional Smoke Detector Bases

File Preview
File Preview
Click below to download for free

File Data

Name potter-sb-series-conventional-smoke-detector-bases-9071463528.pdf
Type PDF
Size 1.00 MB
Downloads

Text Preview

SB SERIES DETECTOR BASES Suitable for use with Potter PFC Series Controls and ULC Listed 24VDC Polarized 3 1 4 or 4 outlet box Output 15mA at 24VDC Current 43mA 24 VDC 4 WIRE BASE 46 46mA 24 VDC 81R 81mA 24 VDC RELAY BASE 93 93mA 24 VDC 21 32mA 24 VDC Use National Fire Alarm Code NFPA 72 units must be installed and maintained in accordance with all NFPA standards local codes and any authority having Please refer to NFPA 72 Standards for Automatic Fire for installation guidelines and testing procedures SB Series is a 6 polarized base with annunciator output featuring current limiting resistor and a blocking diode to enhance annunciator The SB Series Smoke Detector base is designed specifically for with the Potter Smoke Detector Models IS 24 PS 24 and PS 24H detectors will not work without power They must be connected into the signal initiating device circuit of a fire panel that is listed as being compatible by Underwriters Inc detectors will not sense fires which start where smoke does not the detector on other building levels within walls on roofs in chimneys or the other side of closed doors may not be detected from explosions improperly stored flammable liquids escaping arson or fires resulting from inadequate fire protection practices not be detected detectors should be tested upon completion of installation and least semi annually thereafter in accordance with the section of Tests and Maintenance in NFPA 72 Install the Detector Insert the detector into the base turn the detector until it locks then tighten the vandal resistant allen screw 884308 1 15 mA MAX OUTPUT CURRENT LIMITED AT 24 VDC In Out Out In Out Out Smoke Base 46mA draw 24vdc All Potter release panels Not for use with PFC3000 5000 9000 Series panels Smoke Base 93mA draw 24vdc Information Stock Description 1430015 Smoke Base W Relay 81mA draw 1430013 Wire Smoke Base W Relay 43mA draw For use with any panel that can provide 24VDC 4 wire resettable power additional 2 wire base compatibility contact Potter Technical Support at 800 325 3936 or tech pottersignal com other panel manufacturer compatibility listings use on all Potter PFC 3000 5000 Series panels series with ZA9008 module added Not for use on Potter release panels other panel manufacturer compatibility listings use on Potter PFC 3000 and 5000 Series Not for use on Potter release panels other panel manufacturer compatibility listings Electric Signal Co LLC St Louis MO Cust Service 866 240 1870 Tech Support 866 956 1211 Canada 888 882 1833 www pottersignal com IN USA 8840008 REV K 1 OF 1

Related Files