Potter SFH47-1530 SPEAKER SELECT-A-STROBE COMBINATION

A Brand Designed to meet or exceed NFPA ANSI Standards and ADA accessibility guidelines UL Listed for re protective service Field selectable taps from W 2 Watts UL Listed for wall or ceiling mount Available in 25V RMS and 70.7V RMS Screw terminals capacity up to AWG12 Frequency range 400 Hz 4000 Hz Selectable 15 30 candela or 110 candela model Polarized strobes with wide listed voltage ranges using ltered DC or un ltered FWR input voltage Meets ADA guidelines for minimum one ash sec 1Hz All models mount to 4 back box Strobes are 24V DC polarized Synchronization requires SMD10 3A Sync Module Stickers show selected candela rating low pro le re alarm speakers are designed to generate attention grabbing tones and voice commands for emergency signaling applications These highly ef cient speakers are available with eld selectable taps from W 2 Watts They are available in input voltage models 25V RMS and 70.7V RMS and can be installed on a standard 4 x 4 x 1 electrical backbox without the need an extension ring The SFH47 Series Speaker Strobes are designed with the new and exclusive Select A Strobe The housing is clearly with lettering and is polarized for connecting to supervised re alarm circuits The strobe is designed with a xenon ash tube provides a candela intensity eld selector switch for maximum perfomance The Speaker Strobe Series is available in red or white housing 15 75 30 120 and 110 cd models strobe can be synchronized by using the SMD10 3A Sync Module to comply with NFPA recommendations concerning photosensitive when installing two or more visual appliances within the eld of view The strobe signals are listed for indoor use ceiling or wall under UL 1971 standard Current Draw Table cd cd RMS Current mA DC 83 112 117 155 DC FWR Speci cations Input Voltage RMS 1kHz Power Watts k Ohms Pressure Level dB 10ft Response Hz Frequency Cut off Hz Temperature Range 1 10 78 81 120 0 49 inches mm 9 32 58 9 32 58 1 4 184 19 32 15 1 4 32 1 2 140 19 32 15 1 4 32 Electric Signal Company 2081 Craig Road St Louis MO 63146 4161 Phone 800 325 3936 Canada 888 882 1833 www pottersignal com IN USA MKT 8850034 REV A 1 OF 3 Number Rating V RMS Candela Selectable Wattage Grille Type Grille Color Brand Information or 30 120 or 30 120 or 30 120 or 30 120 or 30 120 or 30 120 or 30 120 or 30 120 Diagram sync module is rated for 3.0 amperes at 24V DC Panel Module NEXT DEVICE END OF LINE NEXT DEVICE END OF LINE Selector Switch or 30 120 IN USA 8850034 REV A 2 OF 3 Brand x 4 x 1 x 4 x 1 Grille Grille must be used only on circuits with continuously operating DO NOT use strobe on coded or interrupted circuits in the applied voltage is interrupted ON and OFF as the strobe fail to ash The strobe applied voltage must be within its rated voltage range Fuse ratings on signaling circuits must handle currents from all devices connected to thos circuits Speci cations re alarm speaker shall be capable of reproducing alarm tones or voice commands on 25V RMS or 70.7V RMS Speakers shall provide tap settings of 1 and 2 Watts and shall be selected by means of a jumper wire The speaker shall have a frequency range 400 to 4000 Hz and shall have an operating temperature between 14 and 140 It shall produce a UL sound pressure level at 10 feet up 84dB and be approved for re alarm signaling use The strobe shall be listed under UL 1971 standard for signaling devices for the hearing and shall be approved for re protective service The candela output shall be eld selectable having a dual setting of 15 75 cd or cd output The signaling strobe shall operate on 24V DC from a non coded regulated DC supply or full wave recti ed un ltered supply strobe shall be designed to produce a signal ash of one ash per second with continuously applied minimun voltage The SFH47 shall be of wall or ceiling mounting The visual signaling devices are to be installed in all non sleeping corridor and sleeping areas as per plans speci cations IN USA MKT 8850034 REV A 3 OF 3