Cerberus Pyrotronics Nozzle 180 360 Pre-engineered System Nozzles 6001

File Preview
File Preview
Click below to download for free

Text Preview

FM 200 System Nozzles AND ARCHITECT SPECIFICATIONS 1 1 2 Inch Sizes Area Coverage Capability and 360 Discharge Options Construction Information Brass Nozzles Part No Part No FM 200TM pre engineered system nozzles are de to provide rapid and thorough mixing of FM 200TM the air in the protected space and to provide coverage a large area Standard nozzles are made of brass Pre system nozzles are made in four pipe sizes 1 1 and 2 All sizes have both 180 and 360 patterns available All nozzles both 180 and have a 15 below horizontal discharge pattern to force against ceiling surfaces hung ceiling application the 360 nozzle is recom and should be mounted the maximum distance the ceiling to minimize the effect on the ceiling tiles is also recommended that the tiles be secured in place the liberal use of special clips which are made for this and Architect Specifications nozzles shall be of 180 or 360 discharge pattern type made of brass They shall be marked with the Pyrotronics part number nozzles shall have a standard female pipe thread for to the discharge piping Nozzles shall be in accordance with the instructions in the pre system design manual and as required by the listing or FM approval NUMBER Area and Nozzle Placement Criteria are available in both 180 and 360 discharge The 180 sidewall nozzle is designed for installation the walls of the hazard with discharge directed away from wall on which it is installed The 360 nozzle is designed to installed in the center of the area being protected All nozzles be installed in a vertical pendant position with the nozzle down Nozzles must be installed with orifices 6 2 5cm below ceiling 180 nozzles must be located 12 30 cm 5cm away from side wall Height The maximum ceiling height when using FM nozzles both 180 and 360 is 12 feet 36.6 meters Coverage Both 180 and 360 nozzles were tested for area coverage using a 40 ft wide by 44 ft long x 13.4m enclosure Based on these parameters the area coverage for each nozzle is described as a line distance from the nozzle to the farthest corner of the space 48.33 14.7m 29.73 9.1m Nozzle Nozzle Determine the maximum nozzle area coverage protecting a 20 foot wide enclosure nozzles use max 48.33 ft determine maximum length of nozzle coverage nozzles use max 29.73 ft determine maximum length of nozzle coverage 29.73 ft 48.33 ft Nozzle Nozzle 48.33 2 10 2 cid 214 2335.75 100 47.28 Feet Maximum 29.73 2 102 cid 214 883.87 100 56.0 Feet Maximum Pyrotronics Ridgedale Avenue Knolls NJ 07927 201 267 1300 201 397 7008 in U S A Pyrotronics East Pearce Street Hill Ontario 1B7 CN 905 764 8384 905 731 9182 1996 sheet dated 9 95

Related Files