Cerberus Pyrotronics Pull Box Remote Manual Mechanical Control Pull Box 6012

FM 200TM Extinguishing Systems Box Remote Manual Mechanical Control ENGINEER AND ARCHITECT SPECIFICATIONS Panel or Semi flush Mount Top Bottom or Side Cable Entry Non Electric Means of System Release Cable Length Up to 100 Feet Corner Pulleys Allowed Listed Pending Approved Pending Remote Manual Control Pull Box is used to operate the lever on cylinder valves or selector valves The Pull is connected to the control lever by means of 1 16 inch steel cable run in inch EMT or 3 8 threaded pipe a corner pulley at each change in direction 100 feet of and 18 corner pulleys can be used between the Pull and the control lever The Pull Box can be surface semi or panel mounted and the design provides for en of the cable from the rear top bottom or either side A mounting box with integral cable roller is used for mounting Pull Box provides a means of releasing the system reliance on electrical power the Pull Box is used a pressure switch should be to signal the fire control panel upon system dis so as to assure performance of shutdown interlock Specifications remote manual mechanical control Pull Box shall be for a means of releasing the system without the of electrical power Pull Box shall be UL listed and FM approved Information Weight No Box Corner Pulley Corner Pulley Cable 08 05 lb ft NUMBER Pyrotronics Ridgedale Avenue Knolls NJ 07927 201 267 1300 201 397 7008 in U S A Pyrotronics East Pearce Street Hill Ontario 1B7 CN 905 764 8384 905 731 9182 1995 Issue