Cerberus Pyrotronics RL-6 Remote Lamp Assembly 8011

File Preview
File Preview
Click below to download for free

File Data

Name cerberus-pyrotronics-rl-6-remote-lamp-assembly-8011-1532470869.pdf
Type PDF
Size 1.08 MB
Downloads

Text Preview

RL 6 3 Remote Lamp Assembly AND ARCHITECT SPECIFICATIONS RL 6 RL 6 Listed CSFM Approved Cerberus Pyrotronics RL 6 Remote Lamp Assembly designed for use with low voltage system detectors RL 6 provides a single lamp which will indicate at a remote point the operation of 2 3 or 4 fire detec that are concealed or otherwise not exposed to such as in false ceilings under subfloors in ventilating ducts normally locked vaults consoles etc The RL 6 is UL listed and CSFM RL 6 assembly is fitted with one incandescent lamp a red lens and is designed for mounting on a single gang switch box The lens protrudes the front of the assembly and facilitates viewing the side If any one of the four detectors alarms lamp will turn on Each of the four detector inputs of RL 6 has a series diode to isolate a fired detector the remaining unfired detectors and Architect Specifications remote alarm lamp for the Cerberus Pyrotronics shall be an RL 6 which shall be electrically to 2 3 or 4 detectors for remote indication of alarm condition The unit shall be Underwriters Inc Listed and CSFM approved electrical contractor shall mount the RL 6 on a switch box The wiring between the lamp and detector shall be 18 AWG thermoplastic fixture enclosed in conduit or 18 AWG limited energy cable without conduit if permitted by local codes Installation wiring shall be performed as in system drawings supplied by Cerberus or their authorized distributor Data RL 6 has screw type terminals for ease of installa The brushed stainless steel outer plate is attached screws to an inner support bracket and circuit board which in turn is assembled to the switch box NUMBER Data Wiring Information Wt Alarm Lamp Assembly lb The use of other than Cerberus Pyrotronics detectors and bases with Cerberus Pyrotronics control will be considered a misapplication of Cerberus Pyrotronics equipment and as such void all warranties expressed or implied with regards to loss damage liabilities and or service problems Pyrotronics Ridgedale Ave Knolls NJ 07927 201 267 1300 201 397 7008 in U S A Pyrotronics East Pearce Street Hill Ontario 1B7 CN 905 764 8384 905 731 9182 1995 sheet dated 1 94

Related Files