Cerberus Pyrotronics U-MMT

ENGINEER AND ARCHITECT SPECIFICATIONS Series Horn Universal Mount 1 2 Gang or 4 cid 148 Square back Mounting Horn or Horn Strobe Units 24 Vdc Units Available with 15 75 30 75 75 or 110 Candela Strobes Electronic Selectable 8 Tone Horn Temporal Hi Lo Chime Siren Slow Whoop and Stroke Bell Raised Mounting Design Eliminating Need Deeper Back Box Very Low Inrush Current Available for Wall or Ceiling Mount Devices in or White Colors Light Plastic Grill Construction Low Operating Current DC or Full Wave ADA UL 1971 Horn Strobe Versions Screw Terminals Accept 12 AWG CSFM NYMEA FM Approvals dBA output very low inrush current and the operating current DC or Full Wave are characteristics all new Cerberus Pyrotronics devices The electronic horns provide maximum reliability and low current for every application U MMT series 8 tone horn operates on a current of 20 40ma at 24Vdc depending on tone selected The audio of the signal provides a 91 to 97 dB output The U mounts on a single gang while all other units are 1 2 gang or 4 cid 148 square mounting Pyrotronics notification devices are designed with installer in mind The U MMT series devices are con with all of the electronics in the housing and not in box This design helps eliminate possible ground faults jamming everything in the box Units are also available two different colors red or white U MMT horn strobe units construction consists of flashtube with solid state circuitry for maximum and efficiency The full range of new strobes have rounded dome shape made of clear Lexan cid 147 FIRE cid 148 are visible on the front mounting plate The overall is 2.0 cid 148 x 2 7 8 cid 148 with a height of 1 3 8 cid 148 units can also be synchronous when used with the sync or DSC Dual Sync Control units order a device in cid 147 white cid 148 use a cid 147 W cid 148 at the end of the number i e U MMT W NUMBER Information Series Horn Wall Mount Horn Rating 10 Series Horn Strobe Wall Mount Series Horn Strobe Ceiling Mount Number Horn Rating 10 Number Horn Rating 10 operating range is 20 to 31 Vdc FWR UL measurements ar 85 88dB taken in free air at 360 around device and averaged Typical readings are frontal sound readings with a dB meter with signal mounted on wall Rated for indoor use 32 to 120 0 to 49 with 85 RH Wiring Horn 4.50 H x 2.75 W x 1.25 D Polarity from Panel or device ckt ckt Horn Strobe Horn on same circuits next device or Style Y Class ckts or return F A C P Style A ckts 8 Tone next device E O L Dimemsions 4.75 H 4.75 W x 1.33 D Polarity from Panel or device Notification ckt Notification ckt U