Siemens BK-33 Battery Bracket, Installation Instructions

Installation Instructions BK 33 Bracket PAD Mount the support plate for the batteries on the bottom Z bracket as shown using two screws provided Do not locate the batteries in front of the vertical rail Place the batteries on the support plate Apply the silicone foam pad on the under side of the bracket as shown by the lines to prevent battery movement For the two 12 volt batteries the installer need to trim the foam to fit between the adapter and the bracket Mount the BK 33 battery bracket on the brackets in the EB series enclosures as Use the four screws provided two on each side Force will need to be to compress the foam in order to thread the screws There is an adapter plate provided for use with the BK 33 except when four 6 volt are being used When using two 12 volt batteries mount the adapter plate the bracket with two screws and two flat washers Follow the wiring instructions on the BK 33 label Industry Inc Technologies Division Park NJ 315 087134 7 Building Technologies Ltd Safety Security Products Kenview Boulevard Ontario 5E4 Canada