Siemens BK-33 BT-33 6 0 AH BK-33 BT-34 10 0 AH System 3 Battery Modules, Data Sheet

Data 3TM Modules BK 33 with BT 33 6 AH BK 33 with BT 34 10 AH AND ENGINEER SPECIFICATIONS Sealed spill proof rechargeable batteries Mounts within System 3 enclosures High energy density No corrosive fumes UL Listed and ULC Listed FM CSFM NYC Fire Dept Approved with BK 33 Amp Hr battery pack Amp Hr battery pack Overview System 3 battery supply modules Models and BT 34 are designed to provide emergency standby power to operate a 3 Universal Control during failure of the commercial power source Fire Safety offers two 2 battery modules Long life cycle with BK 33 Model BT 33 contains two 2 sealed lead acid batteries 12 Volts each 6 amp hour of energy Model BT 34 contains four 4 sealed lead acid batteries 6 Volts each providing amp hour of energy Model BK 33 is a battery bracket that can be used on of the aforementioned battery option modules Batteries are especially suited to handle currents They are also ideal for power when used with the proper circuits Terminals are provided for both battery option modules to charger Model BC 35 Industry Inc Technologies Division Models BT 33 BK 33 as well as the Models BK 33 combinations occupy three 3 module spaces and must occupy 3 of the four 4 center module in the lowest module row of the Both aforementioned combinations UL Listed order to supply standby power to the system shall be a Siemens Fire Safety battery module which shall consist of a 24 Volt lead acid battery system of either the electrolyte type or starved electrolyte rated at 6 or 10 amp hour at a 20 hour rate module shall be complete with support and screw type terminals and shall installed on the same standard enclosure houses the control panel and operating 3TM Battery Modules 3351 continued battery option modules shall be the Fire Safety Model BT 33 battery pack the Model BK 33 battery bracket for 6 requirements or the Siemens Fire Model BT 34 battery pack with the Model for 10 amp hour of energy Ratings Voltage Normal Capacity denotes 20 Hour rate AH AH and Humidity Range battery option modules including the bracket used with the battery option are all UL 864 9th Edition Listed for dry locations within a temperature range 120 3 49 2 to 32 3 0 2 a relative humidity of 93 2 at a of 90 3 32 2 for Ordering Weight 175 387141 175 387140 515 087135 6.0 amp hour pack 10.0 amp battery pack 10 AH battery and three space bracket for Models and BT 34 This marketing data sheet is not intended to be used for system design or installation purposes the most up to date information refer to each product installation instructions Industry Inc Technologies Division Safety Fernwood Road Park NJ 07932 973 593 2600 908 547 6877 www SBT Siemens com FIS in U S A Safety Kenview Boulevard Ontario 5E4 Canada 905 799 9937 905 799 9858 2012 sheet dated 8 11 2