Siemens CAB-MP Mounting Plate, Installation Instructions

Installation Instructions CAB MP Mounting Plate Model CAB MP Mounting Plate from Siemens Industry Inc can be purchased as an option for use in CAB1 CAB2 CAB3 enclosures for mounting the modules A total of one CAB MP can be installed in the CAB1 two CAB MPs be installed in the CAB2 and three CAB MPs can be installed in the CAB3 Mounting Plate is for indoor use only in dry environments all system power before installation first battery then AC To power up the AC first then the battery to Figure 1 on page 2 is a top and bottom to the CAB MP Mounting Plate The top is where the word is stamped on the Mounting Plate the CAB MP in your hands with the word at the top of the Place the four holes on the CAB MP Mounting Plate over the studs in the desired location in the CAB enclosure in place with the 10 32 nuts supplied CAB MP can be used in CAB1 CAB2 and CAB3 enclosures Mounting Plate 19.18 x 14.25 315 033012 4 Industry Inc Technologies Division 1 The CAB MP Industry Inc Technologies Division Park NJ Building Technologies Ltd Safety Security Products Kenview Boulevard Ontario L6T 5E4 Canada 315 033012 4