Siemens CPY- PAS2 Pressure-Actuated Control Head, Data Sheet

Sheet Safety Products Engineered Fire Suppression Systems Control Head Pneumatic Manual Actuation CPY PAS2 AND ENGINEER SPECIFICATIONS Core fitting made to fasten onto top adapters that are 1.5 inches 3.75 in diameter Pneumatic release for secondary High quality brass construction Self venting Overview Sinorix Pressure Actuated Head Model CPY PAS2 for pneumatic pressure actuation of Sinorix Model CPY PAS2 is to be mounted directly the top plug adapter assembly CPY PAS2 fastens to top plug adapters that a core fitting of 1.5 inches 3.75 cm in pressure from port marked on the cylinder is self venting to prevent accidental system in the event of a gradual build up of in a pilot line Sinorix 1230 Installation Operations Manual or Sinorix 227 IOM 500 697967 further details install Model CPY PAS2 remove the protection from the top plug adapter After the protection has been removed install Model CPY PAS2 the flexible actuation hose or tubing to the actuation line for Ordering 500 697926BG 2 Control Head Control Head Sinorix 6629 Industry Inc Technologies Division Ensure that the pilot line is unpressurized and actuating piston is in the retracted SET The pistons are to be manually pushed back to the top of the piston actuators to follow this procedure will result in accidental discharge of the Sinorix cylinder when the head is installed on the cylinder Diagrams Industry Inc Technologies Division Sheet Safety Products Engineered Fire Suppression Systems Control Head Pneumatic Manual Actuation CPY PAS AND ENGINEER SPECIFICATIONS Core fitting made to fasten to 1 inch 2.5 cm adapters Pneumatic release for cylinders High quality brass Self venting Overview Sinorix Pressure Actuated Head Model allows for pneumatic pressure actuation of cylinders Model CPY PAS is to be mounted on the top plug adapter assembly CPY PAS is a non adjustable control head thus can only be fastened to top plug that are of 1 inch 2.5 cm in diameter pressure from port marked on the valve is self venting to prevent system discharge in the event of a build up of pressure in a pilot line Sinorix 1230 Installation Operations Manual 500 or Sinorix 227 IOM 500 697967 for further Industry Inc Technologies Division install Model CPY PAS remove the protection from the top plug adapter After the protection has been removed install Model CPY PAS with flexible actuation hose or tubing attached to actuation line for Ordering Page 1 of this document Diagram Ensure that the pilot line is unpressurized and actuating piston is in the retracted SET The pistons are to be manually pushed back to the top of the piston actuators to follow this procedure will result in accidental discharge of the Sinorix cylinder when the head is installed on the cylinder This marketing data sheet is not intended to be used for system design or installation purposes the most up to date information refer to each product installation instructions Industry Inc Technologies Division Safety Fernwood Road Park NJ 07932 973 593 2600 908 547 6877 www USA Siemens com Fire Safety North Service Road Oakville Ontario 0H6 Canada 905 465 8000 www Siemens CA in U S A 2014 sheet dated 6 11 5