Siemens CSB-BRKT Mounting Bracket, Installation Instructions

Installation Instructions CSB BRK Mounting Bracket Model CSB BRK is used in CAB2 and CAB3 enclosures Each CSB BRK comes four CSB modules P N 500 033130 mounted on it The CSB modules connect up to four NIC C modules mounted in CC 2 card cages on the same row of the Also included with the CSB BRK are eight CAN Cables P N 555 634214 connect to the NIC C and LCM 8 or SCM 8 modules If additional CAN Cables are order P N 599 634214 For more information on the CSB refer to the FCM 6 Installation Instructions P N 315 033040 all system power before installation first battery then AC To power up connect the first then the battery Mounting CSB BRK mounts on two studs in the left hand side of the enclosure in the row above or below where the VNT Mounting Plate is mounted Refer to Figure 1 the CSB BRK over the studs and secure in place with the two nuts provided ENCLOSURE 1 the CSB BRK 315 050492 1 Industry Inc Technologies Division to Figure 2 for typical wiring of CSB modules on a CSB BRK in a VNT FCC connections supervised except where noted connections supervised except where noted Cable Cable 555 634214 555 634214 Cable Cable 555 634214 555 634214 PSC 12 PSC 12 PSC U PSC U Flat Flat Cable Cable 555 133036 555 133036 BCL BCL 599 633997 599 633997 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TERMINATOR 110 134215 TERMINATOR 110 134215 TERMINATOR 110 134215 TERMINATOR 110 134215 2 Wiring for CSB Modules on CSB BRK Used in VNT FCC Configuration 1.81 x 12.97 H Industry Inc Technologies Division Park NJ Canada Limited Technologies Division Kenview Boulevard Ontario L6T 5E4 Canada 315 050492 1