Siemens D2300-MP Fiber Optic Interface Mounting Plate, Installation Instructions

Installation Instructions D2300 MP Optic Interface Mounting Plate Model D2300 MP from Siemens Industry Inc is a for mounting up to two D2300CP modules and PS 5A two D2300CPS or two D2325CPS modules in FireFinder XLS CAB enclosure The D2300 MP fits the same footprint as a CC 5 and mounts directly into CAB enclosure or to the optional CAB MP A hard kit is provided for attaching the D2300 MP to the enclosure or the CAB MP and for mounting two and one PS 5A two D2300CPS or two modules onto the D2300 MP The D2300CPS and D2325CPS modules NOT backwards compatible with the existing The D2300CPS and D2325CPS use Make sure to read the front of the module connect to the correct voltage Otherwise seri damage to the unit will result the D2300CP and PS 5A D2300CPS D2325CPS prior to installing the D2300 MP onto the CAB or the CAB MP Note that when using two modules the center mounting holes on each D2300CP D2300CPS share the two center slots on the D2300 MP Figure 1 For additional information refer to the Installation Instructions P N 315 092882 the Installation Instructions P N 315 050018 the D2325CPS Installation Instructions P N 315 050019 applicable D2300CP only D2300CP only the D2300CP D2300CPS D2325CPS in a CAB 1 Backbox 1 Industry Inc Technologies Division Park NJ 315 034758 3 Building Technologies Ltd Safety Security Products Kenview Boulevard Ontario 5E4 Canada