Siemens DGH-11 Detector Guard Housing, Data Sheet

Catalog AND ENGINEER SPECIFICATIONS Guard Housing DGH 11 Heavy duty Tamper proof screw and tool Includes mounting hardware UL Listed ULC Listed Overview detector guard housing Model DGH 11 is for areas with a high potential for tampering or vandalism The sturdy 22 mesh with 14 gauge reinforcement frame of DGH 11 provides rugged protection in areas to vandalism such as schools dormitories etc Model DGH 11 is designed for the balance between maximum detector and for providing adequate openings for products of a smoldering fire to enter detector smoke chamber DGH 11 was designed through substantial room testing Thermal lift in a hot fire many other high security detector guards allow smoke entry however the small openings these guards prohibit combustion products in a fire from entering the detector smoke Industry Inc Technologies Division DGH 11 serves its purpose of life and protection which in turn is why many guards are not listed with smoke detectors DGH 11 was designed to provide the balance between vandalism guard and device For instance the 0.25 inch hex screen opening is optimized for smoke entry smoldering fires The guard is built with a sturdy frame and 22 gauge mesh All detector housings are supplied with lag bolts and for mounting the back plate to the ceiling tool for the security screw is also included with housing When installed with Model FP 11 or HFP 11 FirePrintTM detector the duct should be the application chosen installation instructions for full programming Guard Housing 6181 Data detector guard housing Model DGH 11 is and listed for use with the Model DB detector base and the Model FP 11 detector DGH 11 is applicable to the 30 foot spacing 900 square feet Detector be set for the duct application CSG M must be performed per the instructions for the detector to be used with the housing for Ordering Kg FirePrintTM Detector MXL panel Guard Housing FirePrintTM Detector XLS panel Base Base small This marketing catalog sheet is not intended to be used for system design or installation purposes the most up to date information refer to each product installation instructions Industry Inc Technologies Division Safety Fernwood Road Park NJ 07932 973 593 2600 908 547 6877 www SBT Siemens com FIS in U S A Safety Kenview Boulevard Ontario 5E4 Canada 905 799 9937 905 799 9858 2010 sheet dated 7 03