Siemens FC2025 FC2050 FT2050 Fire Alarm Control Panel, Installation Instructions

FC2025 FC2050 FT2050 FV2050 VR2005 Alarm Control Panel Instructions 3.1 Industry Inc Infrastructure Notice specifications and availability subject to change without notice 2020 Copyright by Siemens Industry Inc reproduction dissemination and or editing of this document as well as utilization its contents and communication thereof to others without express authorization are Offenders will be held liable for payment of damages All rights created by patent or registration of a utility model or design patent are reserved 2020 10 21 ID A6V10337045 en n Industry Inc Infrastructure security disclaimer provides a portfolio of products solutions systems and services that security functions that support the secure operation of plants systems and networks In the field of Building Technologies this includes building and control fire safety security management as well as physical systems order to protect plants systems machines and networks against cyber threats it necessary to implement and continuously maintain a holistic state of the art concept Siemens portfolio only forms one element of such a concept are responsible for preventing unauthorized access to your plants systems and networks which should only be connected to an enterprise network the internet if and to the extent such a connection is necessary and only when security measures e g firewalls and or network segmentation are in Additionally Siemens guidance on appropriate security measures should be into account For additional information please contact your Siemens sales or visit https www siemens com global en home company topicareas portfolio undergoes continuous development to make it more secure strongly recommends that updates are applied as soon as they are and that the latest versions are used Use of versions that are no longer and failure to apply the latest updates may increase your exposure to threats Siemens strongly recommends to comply with security advisories on latest security threats patches and other related measures published among under https www siemens com cert en cert security advisories htm Industry Inc Infrastructure 1 Limitations and Restrictions per UL864 sec 90.23 to Users Installers Authorities Having Jurisdiction AHJ and Other Involved Parties product incorporates field programmable software In order for the product to comply with the requirements in the for Control Units and Accessories for Fire Alarm Systems UL864 certain programming features or options must limited to specific value or not used at all as indicated below in Y N Settings Feature or Options to change the volume for sounder on the FACP Access Point GAP using connection control functions using View Remote User to set FDOOT441 and detectors sensitivity to set the FDOOTC441 to CO level limit to configure the FDCIO422 Class A inputs with Open and circuit supervision to set the FDCIO422 device multiple InputFilterTime to set the FDCIO422 device multiple OutputPulseMode to set the FDCIO422 device NormallyClosedinputs for A Class B wiring for MNS NACs to be as Silenceable client Supervision timeout delay reporting network Industry Inc Infrastructure of the sounder volume on Operating Unit Menu ranges from to Max to Low to Minto to connect the FACP network the Ethernet connection on the Unit to connect to the to connect the FACP network the Ethernet connection on the Unit to permanently connect the Desigo View and FDOOTC441 can be configured in the tool 2.50 ft 3.00 ft 3.00 ft Verified 3.5 ft Verified detectors can be in the programming tool to COlevellimitsin the range of 10ppm inputs can be configured Class A with Open and Short circuit InputFilterTimeSetting be configured in the programming 0.25s 0.5s 1s 2.5s 5s 10s OutputPulseModeTime be configured in the tool 1s 2s 3s 5s 10s InputTypecan be to NormallyClosed Permitted in UL864 of the SounderVolumemust greater than Bypassed setting must be set to Max used with DesigoCC Station connection be in the same room within 20 and installed in rigid conduit Allowed the SelectableAlarmThreshold are 3.00 ft 2.50 ft selection for COlevel be 30ppm Allowed FDCIO422 InputFilter 0.50s 1s OutputPulseModeTime 10s 20s Allowed dedicated for MNS application be configured as Silenceable for the BACnet supervision to be configured from 1s to 10 dedicated for application must be configured Non Silenceable Range must be between sec and 85 sec Alarm Trouble Supervisory interval retransmission intervals can be up to 24 hours retransmission intervals must configured up to 6 hours of primary power Door timing operation Door operation timing Control can be user defined control to be configured to 10 minutes after of primary power Control Group can be user accordingly Control Group to be to 60 secs Max release panel pathway configuration loops could configured Class X A or B verification restart time verification restart time user verification configuration verification devices in a cross operation alarm tone programming programming tone user defined Class X network loops the Redundancy management setting restart time shall not exceed 30 when accomplished on a circuit zone or system verification shall not be used initiating device circuits intended cross zone operations detector MUST be programmed Temporal 4 Trouble supervision Ground Fault monitoring Silence Inhibit Feature supervision setting can be on off reporting must be and fault supervision for the power can be activated or turned off fault supervision must be and activated Silence Inhibit range 0 30 minimum is 3 minutes Industry Inc Infrastructure 2 Limitations and Restrictions per CAN ULC S527 3rd Ed Amd 1 cl 7 to Users Installers Authorities Having Jurisdiction AHJ and Other Involved Parties product incorporates field programmable software In order for the product to comply with the requirements in Standard for Control Units for Fire Alarm Systems certain programming features or options must be to specific value or not used at all as indicated below Feature or Options Settings in Y N Permitted in CAN ULC to change the volume for sounder on the FACP Access Point GAP using connection control functions using View Remote User to set FDOOT441 and detectors sensitivity to set the FDOOTC441 to CO level limit to configure the FDCIO422 Class A inputs with Open and circuit supervision to set the FDCIO422 device multiple InputFilterTime to set the FDCIO422 device multiple OutputPulseMode to set the FDCIO422 device NormallyClosedinputs for A Class B wiring Industry Inc Infrastructure of the sounder volume on Operating Unit Menu ranges from to Max to Low to Minto of the SounderVolumemust greater than Bypassed setting must be set to Max to connect the FACP network the Ethernet connection on the Unit to connect to the