Siemens FCA2012-U1 License key

License key component is only allowed to be operated if it is installed in a fire control panel in the Desigo or series When properly installed by a trained specialist the component does not negatively the EMC characteristics of the fire control panel documentation for the technical details of the component can be found in the following instruction manuals Installation Product Data Electrical installations PRO Electrical voltage shock on electrical installations may only be carried out by certified electricians or by instructed working under the guidance and supervision of a certified electrician in accordance with the regulations Before a station is opened it must be put out of operation and the mains supply must be interrupted The device is current free after it has been disconnected from the mains and the batteries Wherever possible disconnect products from the power supply when carrying out commissioning or repair work on them Lock volt free areas to prevent them being switched back on again by mistake Label the connection terminals with external voltage using a DANGER External voltage sign Route mains connections to products separately and fuse them with their own clearly marked fuse Fit an easily accessible disconnecting device in accordance with IEC 60950 1 outside the installation license key license key is inserted in the retainer provided on the rear of the operating unit key the license key into the operating unit Support for license key Installation position The broader flat side is at the top on the clamp Raise clamp of retainer 1 slightly and push the license key 2 underneath the clamp Technologies Safety Security Products Statement WARNING and usage of equipment is not in accordance with instruction manual of radio frequency energy to radio communications Read the following information and use equipment in accordance with instructions manual equipment generates uses and can radiate radio frequency energy and if not and used in accordance with the instructions manual may cause to radio communications has been tested and found to comply with the limits for a Class A computing pursuant to Part 15 of FCC Rules which are designed to provide protection against such interference when operated in a commercial of this equipment in a residential area is likely to cause interference in case the user at his own expense will be required to take whatever may be required to correct the interference by Industry Inc Technologies Division Fernwood Road Park NJ 07932 1 973 593 2600 2011 Siemens Industry Inc specifications and availability subject to change without notice ID order no A5Q00050992