Siemens FDBZ-WT Weatherproof Enclosure for Air Duct Housings, Installation Instructions

Installation Instructions FDBZ WT Duct Housing Watertight Enclosure FDBZ WT watertight enclosure provides protection Siemens Smoke Detectors when installed in an Air Monitor Housing This enclosure is suitable for in wet high humidity application FDBZ WT provides protection for the following Siemens AD2 P AD2 PR AD2 XLR AD2 4W FDBZ492 R FDBZ492 HR and FDBZ492 Air Duct Monitoring Housing Faraday 8741 8742 8743 8744 Air Duct Monitor Housing The enclosure is accessible via a front cover and it protected with a key lock SPECIFICATIONS Rating 4X UL50 NEMA and CSA enclosure is rated for indoor wet high humidity ap Internal equipment protected from falling rain etc The Air Duct Monitoring Housing models must be in to meet local codes and Authority Housing The Air Duct Monitoring Housing models listed above with an installation kit that contains a mounting Remove the paper backing from the tem and affix to the air duct at the desired location Using the template as a guide drill or punch 2 1 hole for input sampling and outlet tubes all holes Position FDBZ WT enclosure in such a way that the on the template and FDBZ WT line up with other Industry Inc Technologies Division Park NJ Envelope x Door Gasket Cell Neoprene Mark the 4 FDBZ WT mounting holes then drill 3 32 2.5mm pilot holes as marked Secure the FDBZ WT enclosure to the air duct with 12 x sheet metal screws available with the enclosure kit Fit the Air Duct Monitoring Housing on the fitted and secure with nuts 2 provided with FDBZ enclosure Connect the sampling tube and outlet tube to the Duct Monitoring Housing position the tube in a way that air flows into the intake holes A6V10335308 a en A5Q00053512B Canada Limited Technologies Division Kenview Boulevard Ontario L6T 5E4 Canada