Siemens FDBZ492-RTL Remote Alarm Indicator, Installation Instructions

Installation Instructions FDBZ492 RTL Alarm Indicator FDBZ492 RTL Remote Alarm Indicator Figure 1 with the FDBZ492 R or FDBZ492 PR Air Duct with Relays The LED on the remote indicator the color of the LED on the detector Use the re indicator in applications where the detector is not viewed such as air ducts and drop ceilings FDBZ492 RTL also works with FDBZ492 HR to and test its relay output Its LED will indicate if relay is in standby GRN or alarm RED state FDBZ492 RTL provides a key operated detector function When this key is turned to the Test posi the relay on the FDBZ492 R FDBZ492 PR and Air Duct Housing will activate and the will flash red the key is turned to the Normal position the relay the FDBZ492 R FDBZ492 PR and FDBZ492 HR Air Housing will deactivate and the LED will flash green FDBZ492 R or FDBZ492 PR Air Duct Housing Relays can drive one FDBZ492 RTL however the number of detectors and remote indicators must exceed 30 devices on an initiating zone FDBZ492 RTL contains an LED indicator that in one of three colors green yellow or red the FDBZ492 R or FDBZ492 PR Air Duct Hous with Relays flashes the remote indicator flashes in same color The flashes occur approximately every seconds and are described in Table 1 Industry Inc Technologies Division Park NJ A6V10335450 b en remote indicator may be placed up to 25 feet away its associated detector using 14 18 gauge wire Use a single gang switch box user supplied for the FDBZ492 RTL Wire as shown in Figure 2 Electrical Ratings 0.2mA max 24VDC Refer to the FDBZ492 Installation Instructions P N for connection to the addressable air duct housing DETECTOR NOT PAINT 1 Alarm 2 Diagram Canada Limited Technologies Division Kenview Boulevard Ontario L6T 5E4 Canada