Siemens FHA2035-U1 FHA2035-R1, FHA2036-U1 FHA2036-R1 Trim Kits, Installation Instructions

Installation Instructions FHA2035 U1 R1 and FHA2036 U1 R1 Kits for Models FHB2001 U1 R1 and HB2002U1 R1 Backboxes Models FHA2035 U1 R1 and FHA2036 U1 R1 Trim Kits from Siemens Inc are used to semi flush mount FHB2001 U1 R1 and FHB2002 U1 R1 respectively The FHA2035 U1 and FHA2036 U1 Trim Kits are black and FHA2035 R1 and FHA2036 R1 Trim Kits are red and FHA2036 U1 R1 Trim Kits are for indoor use only in dry FHA2035 U1 is designed for use with the FHB2001 U1 the FHA2035 R1 is for use with the FHB2001 R1 FHA2036 U1 is designed for use with the FHB2002 U1 the FHA2036 R1 is for use with the FHB2002 R1 24 x 1 1 2 x 3 4 trim pieces top and bottom 15 x 1 1 2 x 3 4 trim pieces left and right 24 x 1 1 2 x 3 4 trim pieces top and bottom 27 5 8 x 1 1 2 x 3 4 trim pieces left and right the location where the FHB2001 U1 R1 or FHB2002 U1 R1 enclosure is be mounted Refer to the FHB2001 U1 R1 and FHB2002 U1 R1 Installation P N A6V10335922 Inc Inc Inc Industry Inc Inc TTTTTececececechnologies Di Di Di Division Di to Figure 1 for typical Trim Kit installation eight 3 16 holes in the FHA2035 or FHA2036 backbox drilling the outside to the inside in the eight locations indicated by dimples the top bottom and sides of the backbox the necessary hole in the wall for the FHB2001 or FHB2002 enclosure each trim piece to the backbox as shown in Figure 1 Using the 6 32 3 8 screws and washers provided place the head of each screw inside enclosure and fasten it to the trim piece the panel in the recess Refer to the FHB2001 U1 R1 and Installation Instructions P N A6V10335922 Trim Kit is designed so that steps 2 and 3 of this procedure can be reversed Location of dimples 8 places total sides top and bottom of backbox 6 32 x 3 8 screw and washer installed 8 places Side section of trim kit Top section of trim kit Bottom section of trim kit FHB2002 backbox 1 Trim Kit Installation Industry Inc Technologies Division Park NJ