Siemens FMT Desigo Fire Safety Modular Fireman's Telephone, Data Sheet

Fire Safety system Master Telephone Model FMT Architect Engineer Specifications Firefighters master handset Push to talk button Fully supervised Diagnostic light diodes LEDs Mounts to the inner door of CAB1 Model CAB2 CAB3 or Model enclosure Generates and Busy signal for telephones Warden page UL864 CAN ULC S576 Listed Approved NYC 6056 Product Overview Firefighters Master Telephone Module Model FMT provides firefighters an emergency telephone system for communication with remote locations FMT mounts to the rear of the inner door of a Model CAB 1 Model CAB2 CAB3 or Model REMBOX4 enclosure and includes a handset for the of the telephone system Desigo Fire Safety Modular Systems firefighter telephone unit is designed maximum performance in communication quality Model FMT circuitry the master telephone and at least five 5 telephone stations to be off simultaneously with no degradation of audio quality Model FMT A ADPT adapter allows the telephone to be wired for A operation The telephone is supervised by the primary Model FMT device zone call ins are annunciated on Model SCM 8 switch module Remote receive an Acknowledge tone when dialing into command center prior to the call being answered indicates a call in is in progress and a Busy tone calling the command center and another zone is already on line LEDs are located on the back of Model FMT to power is applied to the module and failure of card CAN communication or phone Firefighters Master Telephone Module Model FMT supervised by the Model DAC NET card and it is to one 1 of the 99 Model DAC NET sub addresses CAN addresses Model FMT Technologies Division Sheet 7335 usa siemens com desigo fire safety Temperature and Humidity Range The Firefighters Master Telephone is UL 864 9th Edition Listed for indoor dry locations within a temperature range of 49 2 to 32 3 0 2 and a relative humidity of 93 2 at a temperature of 90 3 32 2 Ratings POWER CURRENT DRAW Plane CURRENT DRAW Terminal max 1mA active LED CURRENT DRAW Plane CURRENT DRAW Power NETWORK peak to peak max message for Ordering MODEL TYPE Telephone A Riser NOTICE The information contained in this data sheet document is intended only a summary and is subject to change without notice product s described here has have a specific instruction sheet s cover various technical limitation and liability information of install type instruction sheets as well as the General Product and Limitations document which also contains important data provided with the product and are available from the Manufacturer contained in the aforesaid type of documentation should be consulted a fire safety professional before specifying or using the product further questions or assistance concerning problems that might arise relative to the functioning of the equipment please contact Manufacturer Fire Safety Industry Inc Technologies Division Fernwood Road Florham Park NJ 07932 973 593 2600 2017 New Issue 0