Siemens FT2008 FT2009 FT2018 FT2019 LED Annunciator-16 Zone, Product Manual

FT2008 R1 FT2009 R1 FT2018 R1 FT2019 R1 Manual Annunciator 16 Zones 32 Zones 2 16 LEDs for 16 zones alarm supervisory trouble event display FT2008 FT2018 2 32 LEDs for 32 zones alarm supervisory trouble event display FT2009 FT2019 Display of system fault and ground fault from the entire system Communication with panel through UFP individual address External 24 V DC power source required from an UL ULC listed recognized for fire regulated power limited power supply In total up to 8 UFP type devices connected to a fire control panel Manually activate deactivate NAC FT2008 FT2009 Acknowledge and reset events from the entire system FT2008 FT2009 Self test function FT2008 FT2009 Flat elegant housing Industry Inc Infrastructure buttons key switch FT2008 FT2009 TestResetAcknowledgeSilencedTroubleGround FaultPowerFT2008 U1Audibles On12345678910111213Lamp TestResetAcknowledgeSilencedTroubleGround FaultPowerFT2009 U1Audibles On12345678910111213firealarmresources com Color On Test indicate alarm event or NAC activation event the zone indicate supervisory event from the zone trouble event from the zone LED annunciator power trouble event from the entire system indicate FT2008 communication failure at fire control panel ground fault event from the entire system are active are silenced waiting to be acknowledged events are acknowledged panel can be reset panel is reset Un silence the NAC in the event events the fire control panel to quiescent condition the LEDs and local buzzer switch The key switch is used for control of button operation Lock key position locked unlocked buttons key switch FT2018 FT2019 indicate alarm event or NAC activation event from zone indicate supervisory event from the zone trouble event from the zone LED annunciator power trouble event from the entire system indicate FT2018 FT2019 communication failure at fire control panel ground fault event from the entire system are active are silenced waiting to be acknowledged are acknowledged Color switch EOL jumper X204 for address setting jumper for setting terminal resistor to UFP power supply and grounding In inch Dip switch is used for the annunciator address setting and baud rate setting The 1 4 digits are for setting the annunciator address the 7 8 digits are for setting UFP baud rate The 5 and 6 digits are reserved for future use switch switch Rate bps bps bps bps to fire control panel FC901 FC2005 19200 bps is required jumper EOL jumper is used for setting terminal resistor of UFP IN resistor is connected OUT resistor is not connected data voltage current quiescent current temperature temperature protocol terminals location for ordering DC Nominal 18.8 DC mA mA mA mA mA rel AWG black red dry device complies with Part 15 of the FCC Rules Operation is subject to the following conditions This device may not cause harmful interference This device must accept any interference received including interference that may undesired operation No No annunciator 16 Zone black annunciator 16 Zone red annunciator 32 Zone black annunciator 32 Zone red annunciator 16 Zone black annunciator 16 Zone red annunciator 32 Zone black annunciator 32 Zone red lb lb lb lb lb lb lb lb For Canadian applications the can be used for display The must be housed in a ULC S527 approved enclosure Not approved for UL ULC MNS applications by Industry Inc Infrastructure Fernwood Road Park NJ 08932 1 973 593 2600 No 2016 Siemens Industry Inc specifications and availability subject to change without notice