Siemens IIC Interface Isolation Card for FireFinder panels, Data Sheet

Data AND ENGINEER SPECIFICATIONS The female ribbon cable receptacle plugs the 60 pin receptacle of the next in line CC 2 card cage Diagram XLS Isolation Card IIC Isolates the respective card cages from HNET network Isolation occurs when the backplane network signals are from each Model CC 2 card cage Provides one 1 end of controller area network CAN on the side of Model CC 2 Designed for use in a Model NCC ring configuration Model NRC Plugs into 60 pin connector UL 864 9th Edition Listed Overview Interface Isolation Card Model IIC is to isolate network signals when with a Model NCC ring configuration Model NRC IIC executes the aforementioned by removing the backplane network from each Model CC 2 card cage IIC also provides one 1 end of CAN on each side of Model CC 2 Interface Isolation Card which through the use of a fire command FCC and a Model VNT series device unison is used to isolate the signals in a configuration via Model NRC Model plugs into the 60 pin connector on the and subsequent Model CC 2 card contained in each enclosure 2 60 pin interfaces are contained each Model IIC Ratings VDC VDC Draws for Ordering Amps max Amps max The male ribbon cable receptacle the data from the cable of the Model CC 2 card cage 850328 Isolation Card Isolation Card 6356 Industry Inc Technologies Division This marketing data sheet is not intended to be used for system design or installation purposes the most up to date information refer to each product installation instructions Industry Inc Technologies Division Safety Fernwood Road Park NJ 07932 973 593 2600 908 547 6877 www SBT Siemens com FIS in U S A Safety Kenview Boulevard Ontario 5E4 Canada 905 799 9937 905 799 9858 2012 Issue 0