Siemens MOD-16 Output Driver, Installation Instructions

Installation Instructions MOD 16 Driver Model MOD 16 MXL Output Driver from Industry Inc is an annunciator driver activates up to 16 outputs Model MOD 16 is controlled by the MOI 7 See P N 315 092799 Up to eight can be used with an MOI 7 MOD 16 activates any of its 16 program outputs for LEDs or for 24V lamps The of either the desired LEDs or the 24V is made at 16 positions on dipswitches S1 S2 See Figure 1 LEDs are used open all dipswitches in S1 S2 to provide for current limiting Opening dipswitch OFF position inserts a 2.7K ohm in series with the output 24V lamps or the SR 35 are used close all the Closing a dipswitch ON position the 2.7K ohm limiting resistor PROPER SETTING OF THE DIP IS NECESSARY TO CIRCUIT DAMAGE additional information on the MXL MXLV refer to the MXL MXLV Manual 315 092036 all system power before installation battery and then AC To power up first the AC and then the battery Mount the MOD 16 in one module space on a 3 type rail using the four screws Connect the MOD 16 to the MOI 7 with the ribbon cable P N 555 190940 with the MOI 7 a connection to a MOD 16 module on rail is required use the optional P N 555 190941 RATINGS voltage 40V peak maximum current for each output 50mA Industry Inc Technologies Division Park NJ 315 090830 8 Building Technologies Ltd Safety Security Products Kenview Boulevard Ontario 5E4 Canada AWG minimum for LED and 24V connections AWG minimum for supply connec TB1 9 and 10 TB2 9 and 10 All wiring must be in accordance with 760 All wiring must conform to local codes to the authority having jurisdiction the installation All wiring to MOD 16 is unsupervised must not leave enclosure For additional information see MOI 7 instructions P N 315 092799 A maximum of 8 MOD 16s can be with the MOI 7 When using SR 35 refer to Table 1 Both TB1 9 or 10 and TB2 9 or 10 be connected to the common of power supply 1 Connection 1 to SR 35 Module Note When using SR 35 with MOD 16 jumpers P1 P8 on SR 35 must be in position B Screw Terminal PSR 1 TB3 1 or to PS 35 TB1 5 PSR 1 TB3 2 or to PS 35 TB1 6 additional information see SR 35 Instructions P N 315 087691 PS 35 Instructions P N 315 085062 PSR 1 Instructions P N 315 090911 315 090830 8