Siemens MSR-1 Rail Kit, Installation Instructions

Installation Instructions MSR 1 Kit 4 washers 4 nuts 1 mounting bracket 1 mounting bracket Brackets only be in top bottom the Model MSR 1 kit from Siemens Industry Inc to mount an EL 410D assemby in an MME 3 or MLE 6 One MSR 1 kit is required for mounting each EL 410D assembly Refer to Figures 1 4 The MSR 1 kit the following items Brackets only be in top bottom 1 EL 410D Installation in an MME 3 Enclosure Brackets Shown for Three Amplifiers 2 EL 410D Installation in an MLE 6 Enclosure Brackets Shown for Five Amplifiers 1 2 or 3 EL 401D amplifiers can be installed in an Up to five EL 401D amplifiers can be installed in an enclosure Install amplifier mounting brackets as shown in Figure 1 hardware supplied with MSR 1 kit Be sure to orientation of the mounting flange enclosure MXL modules other than the EL 410D can also be installed in an MLE 6 enclosure either an MBR MP or MBR 3MP mounting plate Figures 3 and 4 When EL 401D amplifiers are installed in an MME 3 two Model MDG 1 louver vent door inserts be installed in the outer door Install amplifier mounting brackets as shown in Figures 3 and 4 using hardware supplied with MSR 1 kit Be to note orientation of the mounting flange Industry Inc Technologies Division Park NJ 315 098322 3 Installing mounting brackets in accordance with these will result in unused brackets When EL 401D amplifiers are installed in an MLE 6 three Model MDG 1 louver vent door inserts be installed in the outer door Building Technologies Ltd Safety Security Products Kenview Boulevard Ontario 5E4 Canada Enclosure Enclosure Bracket only be in top be 2 U be 2 U Bracket only be in 3 EL 410D Installation in an MLE 6 Enclosure an MBR MP Mounting Plate Brackets Shown for Two Amplifiers 4 EL 410D Installation in an MLE 6 Enclosure an MBR 3MP Mounting Plate Brackets Shown for Two Amplifiers Up to two EL 401D amplifiers can be installed in an enclosure when an MBR MP mounting plate is Up to two EL 401D amplifiers can be installed in an enclosure when an MBR 3MP mounting plate is Install amplifier mounting brackets as shown in Figure 3 Install amplifier mounting brackets as shown in Figure 4 hardware supplied with MSR 1 kit Be sure to orientation of the mounting flange hardware supplied with MSR 1 kit Be sure to orientation of the mounting flange Installing mounting brackets in accordance with these Installing mounting brackets in accordance with these will result in unused brackets will result in unused brackets When EL 401D amplifiers are installed in an MLE 6 When EL 401D amplifiers are installed in an MLE 6 three Model MDG 1 louver vent door inserts be installed in the outer door three Model MDG 1 louver vent door inserts be installed in the outer door 315 098322 3