Siemens RL-HC RL-HW Remote Alarm Lamps, Data Sheet

s Devices Alarm Lamps RL HC and RL HW AND ENGINEER SPECIFICATIONS Sheet Safety Products Designed for use with initiating devices are concealed or otherwise not to view Becomes second accessory with relay or audible base Capable to readily identify well types of initiating devices UL Listed and ULC Listed RL HC RL HW FM CSFM NYC Fire Dept Approved Overview Remote Alarm Lamps Models RL HW and RL HC designed for use with initiating devices that are or otherwise not exposed to view e g cid 326 false ceilings under sub floors in unexposed ducts normally locked vaults within consoles etc Even though the device the alarm is out of sight these remote assemblies will readily identify those and strategically placed types of initiating RL HC is designed for mounting to a 4 outlet box and Model RL HW is designed mounting on a standard single gang switch box there is no mounting limitation Model is normally ceiling mounted while Model RL is normally mounted to a wall The remote may be placed up to 25 feet from the detector use 14 to 18 gauge 3 conductor wire RL HW and RL HC have screw type for ease of installation mounting plates for both alarm lamps are of an off white plastic presenting an appearance that will blend with any for Ordering Lamp Ceiling Lamp Wall Industry Inc Technologies Division Alarm Lamps 6307 Diagram RL HC RL HW This marketing data sheet is not intended to be used for system design or installation purposes the most up to date information refer to each product installation instructions Industry Inc Technologies Division Safety Fernwood Road Park NJ 07932 973 593 2600 908 547 6877 www usa Siemens com Fire in U S A Safety North Service Road Oakville Ontario 0H6 Canada 905 465 8000 www Siemens CA 2014 sheet dated 11 13 3