Siemens RNI-CAB-BRKT RNI-CBL Mounting Plate and System Cable Kit for Global PMI Applications, Installation Instructions

Installation Instructions RNI CAB BRKT and RNI CBL Plate and System Cable Kit for Global PMI Applications Model RNI CAB BRKT Mounting Plate and RNI CBL System Cable Kit from Industry Inc can be purchased separately as options to allow for connec of the PMI PMI 2 in global applications The RNI CAB BRKT must be used to the RNI in CAB1 CAB2 CAB3 enclosures The RNI CBL must be used to a second RNI in a REMBOX4 CAB1 CAB2 or CAB3 when a global printer or HNET modules are required Refer to the Global PMI Application Guide P N for additional information Mounting Plate and RNI CBL System Cable Kit are for indoor use in dry environments all system power before installation first battery then AC To power up the AC first then the battery to Figure 1 installing an RNI in a CAB enclosure you must use mounting plate RNI CAB P N 500 650062 Place the mounting plate in the back of the CAB enclosure in single module mounting position Secure with the four 10 32 x 3 8 screws 1 with RNI in Position 315 050062 3 Inc Inc Inc Industry Inc Inc TTTTTececececechnologies Di Di Di Division Di Kit to Figure 2 a second RNI is needed in a REMBOX4 or CAB 1 2 3 you must use RNI CBL P N the lower RNI RNI 1 setting aside the four 8 32 nuts the lower RNI RNI 1 using the four standoffs provided in the RNI kit field wiring to the lower RNI RNI 1 then attach the RNI CBL to the RNI at connector JP1 the upper RNI RNI 2 in position on the four standoffs and secure four of the 8 32 nuts provided with the RNI field wiring to the upper RNI RNI 2 then attach the RNI CBL to upper RNI at connector JP1 6 Plug the PMI PMI 2 cable into the end of RNI CBL RNI CAB BRKT can be used in CAB1 CAB2 and CAB3 enclosures The RNI CBL be used in REMBOX4 CAB1 CAB2 and CAB3 enclosures RNI 1 and RNI 2 must be PCB revision 3 or higher This can be determined by code under the model name on the right hand side of the RNI N I C B L 2 a Second RNI with RNI CBL Industry Inc Technologies Division Park NJ Canada Limited Technologies Division Kenview Boulevard Ontario L6T 5E4 Canada 315 050062 3