Siemens SET Notification Appliances VANDAL, Data Sheet

Catalog Indoor Series Notification Appliances VANDAL Overview Strobe Strobe SETFL SETFL Audio inputs include a 10 uF blocking capacitor for compatibility with DC supervision of Notification Appliance Circuits Attractive package styles for flush or surface mounting to standard low cost backboxes Sealed back speaker construction for extra protection and improved audibility All strobe inputs are compatible with standard reverse polarity type supervision of circuit by an alarm panel SET V Speaker Strobe models available with multi Candela strobes rated 15 30 75 110cd Field selectable taps for 25 or 70 VRMS operation from 1 8 watt up to 8 watts in 3 dB steps Vandal resistant die cast grilles High efficiency speakers designed for maximum output at minimum wattage across to 4000 Hz frequency range Fast installation with In Out screw terminals using 12 to 18 AWG wiring Designed to meet or exceed NFPA ANSI Standards and ADA Accessibility Guidelines SETSF models UL Listed for outdoor use with Siemens WBBS outdoor backbox Listed ULC Listed CSFM NYMEA Approved Complies with OSHA 29 Part 1910.165 Industry Inc Technologies Division Series Notification Appliances 2583 Speaker appliances shall be Siemens Series SETSF SETFL or SET vandal resistant speakers speaker strobes or equivalent Speakers shall be UL Listed under Standard 1480 for Fire Protective Service and speakers equipped strobes shall be listed under UL Standard 1971 for Emergency Devices for the Hearing Impaired SETSF models shall be listed for outdoor use under UL Standard 1480 All models shall have listed sound output of up to 87 dB at 10 feet and a listed frequency of 400 to 4000 Hz All speakers shall include both 25 and 70 volt VRMS inputs with field selectable power taps 1 8 to 8 watts with listed sound output up to 94 dB for speakers or speaker strobes All models shall have provisions for standard NAC supervision and In Out field wiring terminals that accept 12 to 18 AWG wiring Combination speaker strobe appliances shall incorporate a Xenon flashtube enclosed in a Lexan lens or equivalent with solid state circuitry shall meet UL Standard 1971 and produce a flash rate of one 1 flash per second over the listed input voltage 16VDC 33VDC range Multi Candela strobe intensity shall be rated per UL Standard 1971 at 15 30 75 110cd All strobe versions shall incorporate circuitry for synchronized strobe flash and shall be designed for with Siemens DSC Sync Modules FS 250 panel XLS panel and PAD 3 power supply activation shall be via independent input from the speaker notification appliance circuit and speaker strobe appliances shall be designed for indoor surface or flush mounting All speaker and speaker strobe appliances shall be listed for Special Applications Strobes are designed to flash at 1 flash per second minimum over their Input Voltage Range Note NFPA 72 specifies a flash rate of 1 to 2 flashes per second and ADA Guidelines a flash rate of 1 to 3 flashes per second All candela ratings represent minimum effective Strobe intensity based on UL Standard 1971 Diagram In Inches Options Industry Inc Technologies Division Data 1 Strobe will produce 1 flash per second over the Input Voltage range Strobes meet the required light distribution patterns defined in UL 1971 SET MC V is UL Listed for indoor use with a temperature range of 32 to 120 0 to 49 maximum humidity of 85 RH The outcome of shipping and storage temperatures is not subjected to misuse or abuse shall not adversely affect the performance of the appliance when it is stored in the original cartons The maximum supervision voltage is 33 volts DC Frequency range of speakers is 400 400Hz for Ordering Including Mounting Options Agency Approvals Approvals 500 636047 500 636048 500 636049 500 636050 500 636060 ET Speaker Multi Candela VANDAL Resistant Red 500 636061 ET Speaker Multi Candela VANDAL Resistant White Red White Red White ULC FM CSFM X X X X X X X X X X X X X X listed approved Refer to catalog sheet 2585 for detailed mounting options This marketing catalog sheet is not intended to be used for system design or installation purposes the most up to date information refer to each product installation instructions Industry Inc Technologies Division Safety Fernwood Road Park NJ 07932 973 593 2600 908 547 6877 www SBT Siemens com FIS in U S A Safety Kenview Boulevard Ontario 5E4 Canada 905 799 9937 905 799 9858 2009 sheet dated 7 07 1