Siemens Siemens SL-Series Surface backbox (SLSBB) SL-Series Adapter Kit (SLSGP)

INSTALLATION INSTRUCTIONS SL SERIES SURFACE BACKBOX SLSBB ADAPTER KIT SLSGP this product according to this instruction manual Please keep this instruction manual for future reference Siemens SL Series Surface Backbox SLSBB is UL and ULC listed to allow Siemens SL Series LED wall horn strobe and horn strobe appliances to surface mounted The Adapter Kit SLSGP allows the same appliances to be mounted to a standard recessed single gang or 4 inch sq electrical box Openings on SLSBB 2 side knockout NOTES Please refer to the installation instructions provided for each notification appliance before proceeding with the installation Use mounting screws supplied with this product and mount backbox as shown in the Figure 1 Screws are required NOT OPTIONAL for attaching the SLSBB or SLSGP to a mounting surface or back box OPTIONS 3 4 Inch Square Metal Box For 4 inch sq back box mounting installer must provide a standard metal 4 inch sq to single gang trim plate Mount the SLSBB or SLSGP in the appropriate location Remove only the necessary conduit knock out s when using the SLSBB Connect field wiring to the appliance per the appliance instruction sheet Connect the device to either the SLSBB or SLSGP per the appliance instruction sheet Wiring method shall be in accordance with CSA C22.1 Canadian Electrical Code Part 1 Safety Standard for Electrical Installa Section 32 Check that the installed product will have sufficient clearance and wiring room prior to installing backboxes and conduit espe if sheathed multiconductor cable or 3 4 inch conduit fittings are used Check the installation instructions of the manufacturers of other equipment used in the system for any guidelines or restrictions wiring and or locating Notification Appliance Circuits NAC and notification appliances Some system communication circuits and or circuits for example may require special precautions to assure immunity from electrical noise e g audio crosstalk MATERIAL EXTRAPOLATED FROM THIS DOCUMENT OR FROM SIEMENS MANUALS OR OTHER DOCUMENTS DESCRIBING THE PRODUCT FOR USE PROMOTIONAL OR ADVERTISING CLAIMS OR FOR ANY OTHER USE INCLUDING DESCRIPTION OF THE PRODUCT APPLICATION OPERATION AND TESTING IS USED AT THE SOLE RISK OF THE USER AND SIEMENS WILL NOT HAVE ANY LIABILITY FOR SUCH USE 1 Single Gang Box Retrofit 2 Surface Mounting Box P85318 003ASiemens Canada LimitedBuilding Technologies Division1577 North Service Road EastOakville Ontario L6H 0H6 CanadaSiemens Industry Inc Building Technologies Division Florham Park NJPN P85318 003Afirealarmresources com