Siemens TICAC Input Class A Converter Adder Module, Installation Instructions

TICAC Input Class A Converter Adder Module TICAC Input Class A Converter Adder Module is used to convert 6 Class B input circuits in the TXR 320 Fire Alarm to 6 Class A input circuits It mounts under the TXR 320 main fire alarm board near the input terminal blocks on right hand side 1 TICAC Input Class A Converter Adder Module converter for detection 6 circuits converter for indicating 2 circuits 4 5 6 7 5 8 4 S Y A L E R X U Y A L E R M R A L Y R O R E P U Y A L E E L B U O R Y A L E O C O C O C O C ON ALARM SUPV TROUBLE TROUBLE TROUBLE FAULT FAIL 1 2 3 4 5 1 1 2 3 4 5 polarity and city module TPR 300 on hex spacer two screws provided 1 2 O TPR 300 MODULE TRM 306 RELAY MODULE PORT SPLY TRL COM Module TRM 306 A T T E R Y E C T X 1 2 wiring terminal Kenview Blvd Ont L6T 5E4 Industry Inc Fernwood Florham Park 07932 U S A Rev 2 2013 these pins come with and black wires which connected to the circuit on the fire alarm board Red positive and black is hole for screws hole for screws are no jumpers or cables to set on this module just wiring from the converter wires are fixed here to the TXR Main Fire Alarm Board circuits must be wired from the TICAC module to the Main Fire Alarm board For example Initiating circuit 1 red and negative black wires are connected to the positive and negative terminals respectively of Initiating 1 on the Main Fire Alarm Board From the TICAC converter Initiating circuits are wired out to the devices from the and negative terminals marked DET OUT and the circuit return wires are brought back to the converter module positive and negative terminals marked DET RET Specifications Consumption 0 mA 0 mA Kenview Blvd Ont L6T 5E4 Industry Inc Fernwood Florham Park 07932 U S A Rev 2 2013