Siemens TSW-2 Tamper Switch, Installation Instructions

Installation Instructions TSW 2 Switch Model TSW 2 Tamper Switch from Industry Inc Figure 1 is a 3 posi switch that monitors the opening of the enclosure and reports a security Closing the door automatically returns switch to its normal operating position The can be pulled out to indicate a closed for maintenance purposes to Figure 2 your configuration is UL 1076 it requires the Tamper Switch TSW 2 mounts into the rectangular slot in the upper right side of the MHD 2 in an MXL system or into the rectangular located in the lower right side of the MKB 4 in an MXL IQ system Place the cable connector and the switch through the opening and press into place Plug the cable on the TSW 2 into P9 on MMB MXL system or SMB 1 2 system after installing the or SMB 1 2 additional information on the MXL MXLV refer to the MXL MXLV Manual 315 092036 1 Tamper Switch 2 the TSW 2 Tamper Switch Industry Inc Technologies Division Park NJ 315 092433 6 Building Technologies Ltd Safety Security Products Kenview Boulevard Ontario 5E4 Canada