Siemens XDACT-ASSY for FireFinder panels, Data Sheet

s Sheet Safety Products XLS and XLSV Assembly XDACT ASSY for use with a DACT Model FCA2015 U1 AND ENGINEER SPECIFICATIONS Holds the dialer used on FireFinder XLS XLSV fire alarm control FACPs For use with a Siemens Model FCA2015 U1 digital alarm communications transmitter DACT compatible with current IP and GSM dialers Accounts can either be Ademco ID or SIA One 1 Model XDACT ASSY as well as one 1 Model FCA2015 U1 DACT are required for purchase A Model XDACT ASSY is comprised of one 1 XDACT assembly plate one 1 Person Machine Interface PMI connection cable and connector Configured directly from the custom configurable programming tool ZEUS Global or local configuration For global configurations via ZEUS the Model XDACT ASSY be located in the Global PMI cabinet Firmware upgradeable similar to all XLS XLSV modules Initial upgrade required Adjustable connection test timing Mounts on the inner door of a FireFinder XLS XLSV panel adjacent to the PMI UL 864 9th Edition Listed ULC S527 3rd Edition Listed Overview in conjunction with Siemens FireFinder XLS panels the XDACT Assembly Model XDACT is the blank plate used for holding the optional Alarm Communication Transmitter DACT FCA2015 U1 SIA DCS 8 SIA DCS 20 Ademco Contact ID communication protocols on a given module include Data Properties W x H x D 14.81 0.37 cm 37.6 cm 0.9 cm 1.8 Lbs 817g Assembly 6361 XDACT ASSY can be mounted on all FireFinder XLSV CAB series enclosures The XDACT vertically mounts on the back left hand of an inner door of a XLS panel adjacent to a Machine Each XDACT plate is only available in black turn the DACT mounts onto the XDACT assembly face first with its back end facing outward PMI a DACT can be configured globally or locally Model XDACT ASSY must be located in the PMI 3 Model GPMI 3 cabinet for global Industry Inc Technologies Division of Compatible Alarm Communicators Model XDACT ASSY via the use of a Model technologies including Internet IP and Global System Mobile GSM technologies on Siemens fire control panels in order to connect to central station off monitoring B IP Station Receiver Compatibility Table following table shows a list of central station that are compatible with FireFinder XLSV FACPs DCS 8 DCS 20 ID Multiple central station receivers are compatible the FireFinder XLS XLSV FACPs the table above central station that have been verified by Siemens additional and formats can also be used with each of these systems completing the installation communication the Digital Alarm Communication Transmitter FCA2015 U1 and Central Station Receiver be tested and verified and Humidity Range XDACT ASSY as well as Model FCA2015 U1 UL 864 9th Edition Listed for indoor dry within a temperature range of 120 3 to 32 3 0 2 and a relative of 93 2 at a temperature of 90 3 2 Documentation XLS system overview XLS XLSV system enclosures XLSV voice system overview Machine Interface Alarm Transmitter denotes Desigo product line denotes Cerberus PRO product line for Ordering Number XLS Assembly One 1 XDACT Model cable connection a Model and a Machine PMI Alarm PMI 3 GPMI HW KEY One 1 power This marketing data sheet is not intended to be used for system design or installation purposes the most up to date information refer to each product installation instructions Industry Inc Technologies Division Safety Fernwood Road Park NJ 07932 973 593 2600 908 547 6877 www USA Siemens com FIRE Safety North Service Road Oakville Ontario 0H6 Canada 905 465 8000 www Siemens CA in U S A 2016 sheet dated 10 2016 1